Zeiss Contura Vast XT Gold CMM (সমন্বয় পরিমাপ মেশিন)Zeiss
CONTURA 9/18/8
Zeiss Contura Vast XT Gold CMM (সমন্বয় পরিমাপ মেশিন)
Zeiss
CONTURA 9/18/8
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
১,১০,০০০€
উৎপাদন বছর
২০২০
অবস্থা
ব্যবহৃত
(সম্পূর্ণ ক্রিয়াশীল)
অবস্থান
Budapest 

মৌলিক তথ্য
- উৎপাদক:
- Zeiss
- মডেল:
- CONTURA 9/18/8
- উৎপাদন বছর:
- ২০২০
- অবস্থা:
- খুব ভালো (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
- চলমান ঘণ্টা:
- ১২,৫০০ h
মূল্য এবং অবস্থান
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
১,১০,০০০€
- অবস্থান:
- Budapest, হাঙ্গেরি

কল করুন
প্রযুক্তিগত বিবরণ
ক্ষমতার বিবরণ
ইনপুট ভোল্টেজ:
২৩০ V
ডকুমেন্টেশন এবং সার্টিফিকেশন
গত পুনর্নিরীক্ষণের বছর:
২০২৫
ডকুমেন্টেশন / ম্যানুয়াল
অ্যাক্সিস স্পেসিফিকেশন
এক্স-অক্ষ ভ্রমণ দূরত্ব:
৯০০ মিমি
ওয়াই-অক্ষের গমন দূরত্ব:
১,৮০০ মিমি
জেড-অক্ষের চলাচলের দূরত্ব:
৮০০ মিমি
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A22566042
- আপডেট:
- সর্বশেষ ১৭.০৮.২০২৬
বিবরণ
We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Bledpfx Aozuzf Ieg Non
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Bledpfx Aozuzf Ieg Non
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2023
১ অনলাইন বিজ্ঞাপন
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+36 20 41... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Düsseldorf
৭,৫৫১ km
টুল প্রিসেটার
ZollerSmile 400
ZollerSmile 400
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
তুরস্ক
৫,৬৫৮ km
টপ লোডিং পার্টস ওয়াশার
DOLFIN INDUSTRIAL PARTS WASHING MACHINELYM1-2-Top loading
DOLFIN INDUSTRIAL PARTS WASHING MACHINELYM1-2-Top loading
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Trittau
৭,২৬৮ km
সিএনসি মাল্টি-স্পিন্ডল মেশিন
INDEXMS40-6 C
INDEXMS40-6 C
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Baarle-Nassau
৭,৬৭২ km
স্টোরেজ লিফট
KardexShuttle XP500
KardexShuttle XP500
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Stuttgart
৭,৪৩১ km
অভ্যন্তরীণ এবং মুখ গ্রাইন্ডিং মেশিন
StuderS145
StuderS145
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Sonsbeck
৭,৫৭০ km
DIN 7500 অনুযায়ী টেনসাইল টেস্টিং মেশিন সার্বজনীন
Hegewald & PeschkeH5TMNI
Hegewald & PeschkeH5TMNI
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
জার্মানি
৭,২৯৯ km
সিএনসি টার্নিং এবং মিলিং সেন্টার
TraubTNX 200
TraubTNX 200
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Mögglingen
৭,৩৭৩ km
ভার্টিক্যাল মেশিনিং সেন্টার
HURCOVMX 42 i
HURCOVMX 42 i
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Schwäbisch Gmünd
৭,৩৮৮ km
ওয়্যার ইরোডিং মেশিন
SodickAQ537L, AQ 327L und AG 60L
SodickAQ537L, AQ 327L und AG 60L
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Jakling
৭,০৪৫ km
জিগ গ্রাইন্ডিং মেশিন
HAUSERS35-400
HAUSERS35-400
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে




































































































