সিএনসি মাল্টি-স্পিন্ডল মেশিন

INDEX MS40-6 C

We offer you:

Manufacturer: INDEX
Type: MS40-6 C
Year of manufacture: 2019
Control system: Index control C200-SL, MS40C dual NCU

Technical data:
Working spindles:
Number: 6 pcs.
Spindle bore: max. 40 mm
Max. speed: 7,000 rpm
Power (100% / 25%): 13 / 24 kW
Torque (100% / 25%): 31 / 57 Nm

Synchronous spindle:
Number: 1 pc.
Spindle bore: 40 mm
Max. speed: 8,000 rpm
Power (100% / 25%): 10 / 14 kW
Torque (100% / 25%): 16 / 22 Nm
Slide travel z: 150 mm
Number of tools for rear-end machining: 6 pcs.
Swiveling range b: 144°

Tool holder:
Number: 12 pcs.
Slide travel x: 73 mm
Slide travel y: 42 mm
Slide travel z: 120 mm

Tool holder, facing and back drilling slide:
Number: max. 2 pcs.
Slide travel x: 82 mm
Number of tools for rear-end machining: 6 pcs.

Electrical connection data:
Rated power: 85 kW
Connection power: 101 kVA
Rated current: 145 A
Max. pre-fuse: 160 A
Note: Mains voltage: 400V
Note: Electrical frequency 50 Hz

Technical features & accessories:
- Dual NCU
- Signal light 'Smartlight' with LED
- Machine designed for connection to TN network.
- Coolant: Cutting oil
- NC option synchronous spindle / multi-sided turning incl. electronic shaft

- INDEX loading magazine MBL40-6/3300/surface loader/50Hz:
- Surface loader 50Hz
- for bar diameter D13 - D40
- Bar length 3300 mm
- with drilling unit
- Material supply 700 mm support area
- Profibus-DP-Master interface

- 1 set (72 pieces) bearing halves for bar or square stock with diameter D = * mm,
inner diameter range D14 - D41
- 1 set (6 pieces) reducing bushings for bar or square stock with diameter D = * mm,
inner diameter range D14 - D41

- 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of:
- 6 material sliders D23
- 6 turning sleeves D23

- 1 set (6 pieces) internal clamping sleeves D23mm
- for material diameter D24mm - D32mm
- drilling diameter D15mm

- 1 set (6 pieces) external stops D23mm
- for material diameter D24mm - D32mm
- pre-machined

- 1 set (12 pieces) reducing bushings for material sliders. The outer diameter of the reducing bushings corresponds to the material diameter (D13 - D40)

- 1 set (6 pieces) adapter bushings inner diameter range D13.5 - D40.5.
Gusdpfjzlutmex Aiijd
The inner diameter of the adapter bushings should be bar diameter + 0.5mm.

- Drills for drilling station consisting of:
- 1 indexable insert drill D 15mm
- 10 indexable inserts for steel
- 2 solid carbide drills D 8mm

- 1 set (6 pieces) two-piece guide intermediate tubes diameter 29 mm
- Assembly aid for the bushings of the guide intermediate tubes
- UNIMAG interface for connecting a bar loader
- Part ejection via chute to spindle position 6
- Part conveyor belt in spindle position 6, machine-integrated
- Hainbuch TOPlus Axfix D40 for synchronous spindle

- Multi-sided and threading milling device
- Gear ratio i=5:1
- Incremental encoder for reference detection
- internal oil lubrication
- INDEX short taper tool holder
- without converter
- Rear-end machining device on slide position 6.2 for max. three boring supports for fixed tools

MORE INFORMATION IN THE PICTURES

Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information.
Changes and errors in the technical data and information, as well as prior sale, are reserved!

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।