টেনসাইল টেস্টিং মেশিন ইউনিভার্সাল টেস্টিং মেশিন

Richard Hess MBV GmbH H3000-H5000TM mit Langwegextensometer

Universal testing machine

H3000TM-H5000TM according to DIN EN ISO 7500

The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with
ball screws, ball bushing guides and toothed belt drive.
The bellows cover protects the spindle and guides.
The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface.
The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD
(internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration.
Optionally it is possible to add a second channel for a second load cell or a displacement transducer.
The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool).

Further scope of delivery:
One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity.

For more information, please refer to the attached description.

Load cell 3000N-5000N
Measuring range: 5-5000N tension and compression, with nom. 2mV/V
output signal, overload protection: +/- 1000%, linearity: +/-
0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%,
with, incl. 1.5m connection cable incl. calibration certificate



Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics

Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513

Measuring principle optical incremental
Measuring path 900 mm , minus measuring length
Display error 6 µm or 2
Resolution 1 µm
Actuating force 10 cN
Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps
Lo adjustment is manual
Measuring arm opening and closing is motorized
Hnodpfxeiq Hxke Affok
specimen diameter 0-30 mm
specimen thickness 0-30 mm
sample width 0-100 mm
Weight approx. 32kg
Scope of delivery strain gauge complete with electronics
Cutting edges round: 1 set each carbide / rubber
wear parts measuring blades
optional rectangular cutting edges
ATTENTION: When using optional cutting edges a readjustment of the lo
a readjustment of the lo stop is necessary.

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।