Elালাই টার্নটেবলMB
PRO 2 COM 1802
Elালাই টার্নটেবল
MB
PRO 2 COM 1802
অবস্থা
নতুন
অবস্থান
Ahaus 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
মূল্য এবং অবস্থান
- অবস্থান:
- 48683 Ahaus

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A19924315
- রেফারেন্স নম্বর:
- 1125-8459010
- আপডেট:
- সর্বশেষ ২০.১০.২০২৫
বিবরণ
table diameter 340 mm
table load 160 horizontal kg.
table load 100 vertikal kg.
turning speeds 0,6 - 6,0 U/min
swivelling range 0 - 90 Grad
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
Pedpfx Ajxabm Neb Rorc
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- The turntable has a diameter of
340 mm. The surface is chrome-plated for
Protection against welding spatter.
- The table speed is adjustable from 0.6 - 6 rpm.
- The control of the welding machine via
the turntable control is possible.
- The ground contact transmits 300 A / 100%.
- The turntable and the control are separate.
- HF protected.
- COM 1800 control with lap welding
- Operating instructions in German
Functions COM 1800 control:
- Right/left rotation
- Infinitely variable speed control
- Welding torch on/off
- Overlap welding adjustable
- Controller for rotation time (2-stroke / 4-stroke)
- Speed display
table load 160 horizontal kg.
table load 100 vertikal kg.
turning speeds 0,6 - 6,0 U/min
swivelling range 0 - 90 Grad
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
Pedpfx Ajxabm Neb Rorc
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- The turntable has a diameter of
340 mm. The surface is chrome-plated for
Protection against welding spatter.
- The table speed is adjustable from 0.6 - 6 rpm.
- The control of the welding machine via
the turntable control is possible.
- The ground contact transmits 300 A / 100%.
- The turntable and the control are separate.
- HF protected.
- COM 1800 control with lap welding
- Operating instructions in German
Functions COM 1800 control:
- Right/left rotation
- Infinitely variable speed control
- Welding torch on/off
- Overlap welding adjustable
- Controller for rotation time (2-stroke / 4-stroke)
- Speed display
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2011
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 5939 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে





















