তাপমাত্রা পরীক্ষা ক্যাবিনেট প্রাক্তন সুরক্ষিতCTS
T-30/950 Ex/I
তাপমাত্রা পরীক্ষা ক্যাবিনেট প্রাক্তন সুরক্ষিত
CTS
T-30/950 Ex/I
উৎপাদন বছর
২০১১
অবস্থা
ব্যবহৃত
অবস্থান
Borken 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- তাপমাত্রা পরীক্ষা ক্যাবিনেট প্রাক্তন সুরক্ষিত
- উৎপাদক:
- CTS
- মডেল:
- T-30/950 Ex/I
- উৎপাদন বছর:
- ২০১১
- অবস্থা:
- খুব ভালো (ব্যবহৃত)
মূল্য এবং অবস্থান
- অবস্থান:
- Einsteinstraße 8a, 46325 Borken, Deutschland

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A7538378
- রেফারেন্স নম্বর:
- 23117
- আপডেট:
- সর্বশেষ ২৭.০৬.২০২৫
বিবরণ
CTS
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control – 32-bit controller
Gtjdpoihb Amsfx Adnjt
LCD control panel
Digital display for set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
Free switching channels for product-side test specimen activation
Temperature Testing:
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min down to -10°C
Thermal radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the
o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate).
The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air.
Afterwards, the gas is returned to the test chamber via a second flame arrestor.
The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix.
The gas system is currently deactivated!
All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment.
Dimensions:
Test chamber volume: 950 liters
Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm
External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm
Operating data:
Electrical connection: 400V +6/-10 %, 3/N, 50 Hz
Nominal power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, R 1/2" inner thread
Sound pressure level:
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control – 32-bit controller
Gtjdpoihb Amsfx Adnjt
LCD control panel
Digital display for set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
Free switching channels for product-side test specimen activation
Temperature Testing:
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min down to -10°C
Thermal radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the
o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate).
The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air.
Afterwards, the gas is returned to the test chamber via a second flame arrestor.
The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix.
The gas system is currently deactivated!
All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment.
Dimensions:
Test chamber volume: 950 liters
Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm
External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm
Operating data:
Electrical connection: 400V +6/-10 %, 3/N, 50 Hz
Nominal power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, R 1/2" inner thread
Sound pressure level:
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 2861 ... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
ক্ষুদ্র বিজ্ঞাপন
Forst
৭,৪৬৭ km
100 m³ বাফার ট্যাঙ্ক, 3 বার, উত্তাপ
ক্ষুদ্র বিজ্ঞাপন
Hochdorf
৭,৪১১ km
তাপমাত্রা কুলিং ইউনিট (টিসিইউ)
SingleCompact WK3-160-9-50 (IM160F)
SingleCompact WK3-160-9-50 (IM160F)
ক্ষুদ্র বিজ্ঞাপন
Berlin
৭,০৮৬ km
অক্ষীয় কনডেন্সার
Güntner AGGVH 100.2A/2x3-J(D)
Güntner AGGVH 100.2A/2x3-J(D)
ক্ষুদ্র বিজ্ঞাপন
Tata
৬,৭৭৫ km
লিকুইড রিকুলার কনডেন্সার
Güntner GVH 090.1.D/5-M(D)680,4 /579,2 kw
Güntner GVH 090.1.D/5-M(D)680,4 /579,2 kw
ক্ষুদ্র বিজ্ঞাপন
Schmölln
৭,১৬৯ km
ঠান্ডা ঘর
Dresdner Kühlanlagenbau
Dresdner Kühlanlagenbau
ক্ষুদ্র বিজ্ঞাপন
Delmenhorst
৭,৩৯১ km
1000L চাপ ট্যাংক বাফার স্টোরেজ
10539
10539
ক্ষুদ্র বিজ্ঞাপন
Nattheim
৭,৩৫৫ km
স্থায়ী প্যানেল দেখেছি
Holz-Her1255
Holz-Her1255
ক্ষুদ্র বিজ্ঞাপন
Niedźwiedź
৬,৬৩৪ km
দুই-পর্যায়ের কম্প্রেসার ইউনিট
BitzerS6G-25.2Y (x4)
BitzerS6G-25.2Y (x4)
ক্ষুদ্র বিজ্ঞাপন
Borken
৭,৫৩১ km
আর্দ্রতা সহ জলবায়ু পরীক্ষার চেম্বার 1000 লিটার
CTSC-40/1000 -40°C bis +180°C
CTSC-40/1000 -40°C bis +180°C
ক্ষুদ্র বিজ্ঞাপন
Wiefelstede
৭,৪২৩ km
বায়ুচলাচল পদ্ধতি
HeimerWK-61
HeimerWK-61
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে




























































































