তাপমাত্রা পরীক্ষা মন্ত্রিসভাCTS
TSR-30/1000
তাপমাত্রা পরীক্ষা মন্ত্রিসভা
CTS
TSR-30/1000
অবস্থা
ব্যবহৃত
অবস্থান
Borken 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
মূল্য এবং অবস্থান
- অবস্থান:
- Einsteinstraße 8a, 46325 Borken, Deutschland

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A14926978
- রেফারেন্স নম্বর:
- 23988
- আপডেট:
- সর্বশেষ ১৫.১১.২০২৪
বিবরণ
CTS
Type: TSR-30/1000
Water-cooled
The type designation of the CTS enclosure series is made up as follows:
z. e.g. type TSR -30/1000
1) T means: Temperature
2) S means: stress screening
3) R means: external conditioning
4) -30 means: lower temperature -30 °C
5) 1000 means: 1000 liter test chamber volume
Technical performance data:
A) TSR-30/1000 basic device without hose connections,
i.e. when used as a stand-alone temperature test chamber
Temperature tests:
Temperature range -40°C to +180°C
Final temperature -45°C
Temperature deviation ≤ ±0.3 K in time
Temperature change rate according to IEC 60068-3-5
Heating 6.0 K/min
Cooling 5.0 K/min
Heat radiation
approx. 5000 W at +20°C
approx. 4200 W at ± 0°C
approx. 3000 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment.
Air volume flow
approx.2000m³/h
B) TSR-30/1000 basic unit with hose connections,
for connection to an external test room provided by the customer
Temperature tests:
Temperature range -30°C to +170°C
Temperature deviation ≤ ±0.1 to 0.5 K in time
Average rate of temperature change,
measured with short-circuited circuit
Heating 4.0 K/min
Cooling 4.0 K/min
in the range from +150°C to -10°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment,
measured with short-circuited circuit
Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated,
any feed-throughs must be optimally sealed on site.
Dimensions:
Test volume 1000 liters
Air circulation connection Ø 200 mm
Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm
External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm
Gjdpjrivfcjfx Adnoil
Technical design:
Refrigeration unit:
water-cooled, low-noise, fully hermetic
Infinitely variable capacity adjustment through
electronic monitoring and control system,
environmentally friendly refrigerant R404A
Door:
Fully opening door, door hinge on the left,
one-handed operation, lockable.
Shelf:
Stainless steel, support surface 970 x 980 mm
Max. load per shelf 35 kg
Total load with max. shelf load 100 kg
Test area lighting: Halogen lamp 20 W, 12 V
Control:
- 32 bit controller
- LCD control panel
Operating data:
Electrical connection 400 V +6/-10 %, 3/N, 50 Hz
Rated power 13.3 kW
Protection class IP 22
Sound pressure level < 60 dB(A)
Weight approx. 850 kg
The following information is for your safety as a buyer!
The following points are carried out on our offered chambers in advance:
1. functional check and replacement of necessary components
2. if necessary, refilling with legally compliant refrigerant
3. leak test with certificate
4. after successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Type: TSR-30/1000
Water-cooled
The type designation of the CTS enclosure series is made up as follows:
z. e.g. type TSR -30/1000
1) T means: Temperature
2) S means: stress screening
3) R means: external conditioning
4) -30 means: lower temperature -30 °C
5) 1000 means: 1000 liter test chamber volume
Technical performance data:
A) TSR-30/1000 basic device without hose connections,
i.e. when used as a stand-alone temperature test chamber
Temperature tests:
Temperature range -40°C to +180°C
Final temperature -45°C
Temperature deviation ≤ ±0.3 K in time
Temperature change rate according to IEC 60068-3-5
Heating 6.0 K/min
Cooling 5.0 K/min
Heat radiation
approx. 5000 W at +20°C
approx. 4200 W at ± 0°C
approx. 3000 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment.
Air volume flow
approx.2000m³/h
B) TSR-30/1000 basic unit with hose connections,
for connection to an external test room provided by the customer
Temperature tests:
Temperature range -30°C to +170°C
Temperature deviation ≤ ±0.1 to 0.5 K in time
Average rate of temperature change,
measured with short-circuited circuit
Heating 4.0 K/min
Cooling 4.0 K/min
in the range from +150°C to -10°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment,
measured with short-circuited circuit
Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated,
any feed-throughs must be optimally sealed on site.
Dimensions:
Test volume 1000 liters
Air circulation connection Ø 200 mm
Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm
External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm
Gjdpjrivfcjfx Adnoil
Technical design:
Refrigeration unit:
water-cooled, low-noise, fully hermetic
Infinitely variable capacity adjustment through
electronic monitoring and control system,
environmentally friendly refrigerant R404A
Door:
Fully opening door, door hinge on the left,
one-handed operation, lockable.
Shelf:
Stainless steel, support surface 970 x 980 mm
Max. load per shelf 35 kg
Total load with max. shelf load 100 kg
Test area lighting: Halogen lamp 20 W, 12 V
Control:
- 32 bit controller
- LCD control panel
Operating data:
Electrical connection 400 V +6/-10 %, 3/N, 50 Hz
Rated power 13.3 kW
Protection class IP 22
Sound pressure level < 60 dB(A)
Weight approx. 850 kg
The following information is for your safety as a buyer!
The following points are carried out on our offered chambers in advance:
1. functional check and replacement of necessary components
2. if necessary, refilling with legally compliant refrigerant
3. leak test with certificate
4. after successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 2861 ... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
ক্ষুদ্র বিজ্ঞাপন
Cassolnovo
৭,৫২৯ km
গিলডেমিস্টার ল্যাথ
GildemeisterCTX 420 V6
GildemeisterCTX 420 V6
ক্ষুদ্র বিজ্ঞাপন
Eggstätt
৭,২১৩ km
মিলিং মেশিন
AlzmetallGS 1000/5-T
AlzmetallGS 1000/5-T
ক্ষুদ্র বিজ্ঞাপন
Cloppenburg
৭,৪৩৪ km
২০১৯ ডিএমজি মরি লেজারটেক ৩০ এসএলএম ২য় প্রজন্ম
DMG MoriLasertec 30 SLM 2nd Generation
DMG MoriLasertec 30 SLM 2nd Generation
ক্ষুদ্র বিজ্ঞাপন
Berlin
৭,০৮৬ km
উল্লম্ব ইনজেকশন ছাঁচনির্মাণ মেশিন
ENGELe-insert 740H/60 single-C
ENGELe-insert 740H/60 single-C
ক্ষুদ্র বিজ্ঞাপন
Eggstätt
৭,২১৩ km
মিলিং মেশিন
Alzmetallgs 600
Alzmetallgs 600
ক্ষুদ্র বিজ্ঞাপন
Deutschland
৭,২৯৯ km
ইনজেকশন ছাঁচনির্মাণ মেশিন
ArburgALLROUNDER CENTEX 320C 500-250 VO
ArburgALLROUNDER CENTEX 320C 500-250 VO
ক্ষুদ্র বিজ্ঞাপন
Emmelshausen
৭,৫১৯ km
লেদস
GildemeisterCTX beta 1250 4 A
GildemeisterCTX beta 1250 4 A
ক্ষুদ্র বিজ্ঞাপন
Courbevoie
৭,৯২২ km
ভার্টিক্যাল মেশিনিং সেন্টার
mikronVCP600
mikronVCP600
ক্ষুদ্র বিজ্ঞাপন
জার্মানি
৭,১৬২ km
টুল প্রিহিটার-সঙ্কুচিত ডিভাইস
BilzISG 3200-WK
BilzISG 3200-WK
ক্ষুদ্র বিজ্ঞাপন
Mittweida
৭,১২৭ km
5-অক্ষ যন্ত্র কেন্দ্র
+GF+MIKRON HPM 1350U
+GF+MIKRON HPM 1350U
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে










































































































