ভার্টিক্যাল টার্নিং এবং মিলিং ল্যাথ VL 40

WMW Romania VL40

Vertical Turning and Milling Lathe VL 40 CNC
Turning Center’s Specifications
Nominal Turning Envelope
Faceplate Diameter 3.500 mm
Machining Diameter:
-maximum
-minimum
4.000 mm
0 mm
Swing diameter 4.000 mm
Machining Heights 2.000 mm
Work Piece Weight 60,000 kg
Nominal Turning Travels
X - Axis Ram Carriage
From -100 mm
To 2.250 mm + ATC travel
Z - Axis Ram 1.500 mm
Work Table
WorkTable Diameter 3.500 mm
Normal face plate with T-slots
Work Table Speed:
-for machining
1 - 110 rpm
Power Continuous S1/ S6 57/75 kW
Torque Continuous S1 / S6 70,000 / 90.000 Nm
Turning main drive mechanism Gear box reducer and belt transmission,
C axis drive
Work Table Milling Speed 0.02 to 2 rpm
Milling Torque Continuous S1 43,000 Nm
Locking Table Torque (hydraulic double side devices) 60,000 Nm
Z - Axis Ram
Turning & Milling Ram
Ram Size 300 x 300 mm
Tool shank size:

Shank 32*32 / 40*40 mm
automated tool clamping
Ram Speed 0 to 2.500 rpm
Power Continuous S1 22 kW
Torque Continuous S1 1.400 Nm
Driving mechanism ZF gearbox, two stages, belt transmission
ZF gearbox and main spindle bearing sets are supplied with coolant systems, individually for each.
Tool taper BT 50 DIN 69871 / automated tool clamping
Tool Storage
Number Of Tool Magazines



two ATC
-one for left side, 20 turning/milling/drilling stations
-one for right side 20 milling/drilling and part probe
Tool Storage 20 + 20
ATC turning capabilities:
Maximum Singular Tool Weight – turning toolholder
Maximum Singular Tool Weight – milling/drilling toolholder

Total Tool Weight
Maximum tool size – turning
Maximum tool size – milling
Maximum tool size - drilling
Maximum length
50 kg
25 kg




600 kg
250 x 150 mm
Dia. 300 mm
Dia. 120 mm
600 mm
Axes Drives
X and U - Axes Ram Carriage
Power Continuous S1 5.5 kW
Thrust Continuous S1 40,000 N
Z-Axis Ram
Power Continuous S1 5.5 kW
Thrust Continuous S1 40,000 N
Power Continuous S1 11 kW
Axes Rates
Gbedpjy Dfraefx Aifst
X And Z - Axes Feed Rates 0.02 to 6,000 mm/min
X And Z -Axes Rapid Rates 10,000 mm/min
Coolant System
Coolant Tank Capacity 2.000 L
Coolant Pressure / Flow Rate:
-internal coolant (turning)
-internal coolant (milling) / pressure adjustments steps
Filtration unit:
-type
6 bar at 100 LPM
30 bar at 60 LPM

Cartridge type


Chips conveyor
Conveyor type Hinged , frontal placed