ছাঁচকারী মেশিন

WEINIG HYDROMAT 23 (9 spindle) GROOVED

WEINIG HYDROMAT H23

ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN).
FEED MOTOR 15 KW

50MM SPINDLES
WORKING WIDTH MAX. 230 MM
WORKING HEIGHT MAX. 160 MM

SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW)
BOTTOM 7.5KW 6,000 RPM
RIGHT 7.5KW 6,000 RPM
LEFT 7.5KW 6,000 RPM JOINTER READY
RIGHT 7.5KW 6,000 RPM
LEFT 7.5KW 6,000 RPM JOINTER READY
TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY
BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY
TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY
BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY

12X TOP FEED ROLLERS
6X BOTTOM FEED ROLLERS
CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL

POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED

FULL SOUND ENCLOSURE
AUTOMATIC LUBRICATION SYSTEM
FULL DOCUMENTATION INCLUDED
EXHAUST MANIFOLD INCLUDED

MACHINE LENGTH 5.2M
POSSIBLE TO OFFER MECHANISATION IF NEEDED
POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED
Iiedpfx Abez Dnt Iomeg

Grooved Feed Guidance, Core Functions & Benefits:
The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence.

Friction & Resin Relief:
Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking.

Debris & Pitch Clearance:
Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface.

Wax/Lubricant Distribution:
When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board.

Common Applications
Short Stock Processing:
Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence.

Cupped or Unseasoned Wood:
Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles.

High-Speed Feed Lines:
Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.