সীসা/ফিড টাকু লেদWeiler
Primus GS
সীসা/ফিড টাকু লেদ
Weiler
Primus GS
VB ট্যাক্স (মূসক) অতিরিক্ত
১৪,৫০০€
অবস্থা
ব্যবহৃত
অবস্থান
Ubstadt-Weiher 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- সীসা/ফিড টাকু লেদ
- উৎপাদক:
- Weiler
- মডেল:
- Primus GS
- অবস্থা:
- খুব ভালো (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
VB ট্যাক্স (মূসক) অতিরিক্ত
১৪,৫০০€
- অবস্থান:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A18092236
- আপডেট:
- সর্বশেষ ২০.১২.২০২৪
বিবরণ
Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8
from training workshop Super condition !!!
Technical data:
>> Year of construction approx. 1990 Machine no. 3768
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle clearance 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MK 2
>> Feed rates from 0.03 to 0.15 mm /rev
>> Possible threads metric, inch, module and diametral pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 3-axis digital display from Easson ES8
>> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube
>> 1 three-jaw chuck with 2 sets of jaws
>> 1 four-jaw chuck with 2 sets of jaws
>> Mulifix size A with 3 steel holders
>> Bed stop
>> Turning device
To the machine :
Hedpfx Aovkfhpsggsw
We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
from training workshop Super condition !!!
Technical data:
>> Year of construction approx. 1990 Machine no. 3768
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle clearance 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MK 2
>> Feed rates from 0.03 to 0.15 mm /rev
>> Possible threads metric, inch, module and diametral pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 3-axis digital display from Easson ES8
>> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube
>> 1 three-jaw chuck with 2 sets of jaws
>> 1 four-jaw chuck with 2 sets of jaws
>> Mulifix size A with 3 steel holders
>> Bed stop
>> Turning device
To the machine :
Hedpfx Aovkfhpsggsw
We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2007
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 7251 ... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
ক্ষুদ্র বিজ্ঞাপন
Hessisch Lichtenau
৭,৩৪৯ km
L + Z লেদ মেশিন, লেদ, মেকানিকাল লেদ মেশিন
WEILERLZ PRIMUS GS
WEILERLZ PRIMUS GS
ক্ষুদ্র বিজ্ঞাপন
Burgoberbach
৭,৩২১ km
সীসা & ফিড টাকু লেদ
WEILERPrimus GS 4443
WEILERPrimus GS 4443
ক্ষুদ্র বিজ্ঞাপন
Ubstadt-Weiher
৭,৪৬২ km
সীসা/ফিড টাকু লেদ
WeilerPrimus GS
WeilerPrimus GS
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে












































