ডিপ হোল ড্রিলিং মেশিনTBT Tiefbohrtechnik GmbH + Co
MULTIPRO ML200-2
ডিপ হোল ড্রিলিং মেশিন
TBT Tiefbohrtechnik GmbH + Co
MULTIPRO ML200-2
উৎপাদন বছর
২০২২
অবস্থা
ব্যবহৃত
(সম্পূর্ণ ক্রিয়াশীল)
অবস্থান
Dettingen an der Erms 

মৌলিক তথ্য
- মেশিনের নাম:
- ডিপ হোল ড্রিলিং মেশিন
- উৎপাদক:
- TBT Tiefbohrtechnik GmbH + Co
- মডেল:
- MULTIPRO ML200-2
- মেশিন নম্বর:
- 106882-11
- উৎপাদন বছর:
- ২০২২
- অবস্থা:
- প্রায় নতুন (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
- অবস্থান:
- Siemensstraße 1, 72581 Dettingen, Deutschland

কল করুন
প্রযুক্তিগত বিবরণ
মাত্রা এবং ওজন
মোট ওজন:
৭,০০০ কেজি
মোট দৈর্ঘ্য:
৪,৪০০ মিমি
মোট প্রস্থ:
১,৭০০ মিমি
মোট উচ্চতা:
২,৭০০ মিমি
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A19100056
- আপডেট:
- সর্বশেষ ৩০.০৭.২০২৫
বিবরণ
The drilling process of the deep hole drilling machine utilizes the single-lip drilling method.
Drilling Unit Information:
- Drilling depth: 200 mm
- Min./max. drilling diameter: 1–12 mm based on ST 60
- Number of spindles: 2
- Spindle distance: 200 mm
- Spindle drive: 2 x 2.4/4.2 kW
- Infinitely variable spindle speed: 1,000–20,000 rpm
- Infinitely variable feed rate: 10–25,000 mm/min
- Rapid traverse: 25,000 mm/min
- Slide travel (nominal): 650 mm
- Slide width: 460 mm
- X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min
- Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min
Fluid Information:
- Coolant supply: deep hole drilling oil
- Tank capacity: 500 liters
- 1x automatic filter, filter performance: 50 l/min
- 1x monitoring filter
- 2x ELB drilling oil supply lines
- 1x flow divider
- 1x air cooler with recirculation pump
- 1x electrostatic oil mist extraction unit
- 1x scraper belt chip conveyor
- 1x hydraulic unit and pneumatic unit/equipment
- 1x sump pump
- 3x submersible pumps
- 1x radial piston pump with remote adjustment:
Delivery rate: 1–38 l/min
Pump drive: 7.5 kW
Spindle Unit:
- Motorized spindles with frequency-controlled, infinitely variable speed regulation
- Spindle head with connection for tool holder
- 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle
Drill Bushing Carrier:
- The drill bushing carrier is positionable via the NC axis
- Cast iron design, mounted on linear guideways
- W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system
Workpiece Slide:
- The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures
- Base unit in cast iron design with linear roller guideways
- X and Y axes driven by AC servomotors and ball screws
- Direct, absolute position measurement systems. Table plate with clamping or alignment grooves
Clamping Table with NC rotary indexing device for positioning:
- With rotary and swivel axes
- Hydraulic clamping in rotary and swivel axes
Technical Data:
- Swivel range: 270º
- Rotary range: 360º
- Center height: 25 ± 0.02
- Spindle distance: 200 ± 0.005
- Indexing accuracy: rotary axis ± 15" / swivel axis ± 30"
Electrical Equipment Information:
- 1x drilling process monitoring
- 1x CNC control 840D (Solution Line)
Ibodpfowh Rp Esx Ad Nsd
Connection Data:
- Operating voltage: 3AC 400V ± 10%
- Frequency: 50 Hz
- Control voltage: 24 V DC
- Total rated power: 25 kW
Additional Machine Equipment:
- 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier
- For max. drilling Ø18 mm.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Drilling Unit Information:
- Drilling depth: 200 mm
- Min./max. drilling diameter: 1–12 mm based on ST 60
- Number of spindles: 2
- Spindle distance: 200 mm
- Spindle drive: 2 x 2.4/4.2 kW
- Infinitely variable spindle speed: 1,000–20,000 rpm
- Infinitely variable feed rate: 10–25,000 mm/min
- Rapid traverse: 25,000 mm/min
- Slide travel (nominal): 650 mm
- Slide width: 460 mm
- X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min
- Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min
Fluid Information:
- Coolant supply: deep hole drilling oil
- Tank capacity: 500 liters
- 1x automatic filter, filter performance: 50 l/min
- 1x monitoring filter
- 2x ELB drilling oil supply lines
- 1x flow divider
- 1x air cooler with recirculation pump
- 1x electrostatic oil mist extraction unit
- 1x scraper belt chip conveyor
- 1x hydraulic unit and pneumatic unit/equipment
- 1x sump pump
- 3x submersible pumps
- 1x radial piston pump with remote adjustment:
Delivery rate: 1–38 l/min
Pump drive: 7.5 kW
Spindle Unit:
- Motorized spindles with frequency-controlled, infinitely variable speed regulation
- Spindle head with connection for tool holder
- 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle
Drill Bushing Carrier:
- The drill bushing carrier is positionable via the NC axis
- Cast iron design, mounted on linear guideways
- W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system
Workpiece Slide:
- The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures
- Base unit in cast iron design with linear roller guideways
- X and Y axes driven by AC servomotors and ball screws
- Direct, absolute position measurement systems. Table plate with clamping or alignment grooves
Clamping Table with NC rotary indexing device for positioning:
- With rotary and swivel axes
- Hydraulic clamping in rotary and swivel axes
Technical Data:
- Swivel range: 270º
- Rotary range: 360º
- Center height: 25 ± 0.02
- Spindle distance: 200 ± 0.005
- Indexing accuracy: rotary axis ± 15" / swivel axis ± 30"
Electrical Equipment Information:
- 1x drilling process monitoring
- 1x CNC control 840D (Solution Line)
Ibodpfowh Rp Esx Ad Nsd
Connection Data:
- Operating voltage: 3AC 400V ± 10%
- Frequency: 50 Hz
- Control voltage: 24 V DC
- Total rated power: 25 kW
Additional Machine Equipment:
- 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier
- For max. drilling Ø18 mm.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2025
৩ অনলাইন বিজ্ঞাপন
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 7123 ... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Warren
১২,৬৪৩ km
গিয়ারহুইল শেপিং মেশিন
Gleason100S
Gleason100S
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Saarbrücken
৭,৫৮৫ km
মাইক্রোস্কোপ / মাল্টিসেন্সর মাপার মেশিন
MahrMS 222 Komplettpaket mit Lieferung*
MahrMS 222 Komplettpaket mit Lieferung*
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Waiblingen
৭,৪২১ km
নলাকার গ্রাইন্ডিং মেশিন
KELLENBERGERKEL-VISTA UR 175/1000
KELLENBERGERKEL-VISTA UR 175/1000
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Tata
৬,৭৭৫ km
AIDA NC2-160 এক্সসেন্ট্রিক প্রেস, ১৬০ টন
AIDA NC2-160160ton
AIDA NC2-160160ton
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Agios Athanasios
৬,৩৫৪ km
ব্রোচিং মেশিন
BROACHING MACHINE
BROACHING MACHINE
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Lindlar
৭,৫১৬ km
মসৃণতা মেশিন
Weiz Industrie- und RobotertechnikRPM500_OSZ2
Weiz Industrie- und RobotertechnikRPM500_OSZ2
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Kirchheim unter Teck
৭,৪১৩ km
পৃষ্ঠ ঘর্ষণ মেশিন
GEIBEL & HOTZFS640 SD
GEIBEL & HOTZFS640 SD
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Plettenberg
৭,৪৭৪ km
পাঞ্চিং মেশিন ডবল কলাম
HAULICK & ROOSRVD 125-910 NS
HAULICK & ROOSRVD 125-910 NS
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Diósd
৬,৭২৮ km
সিএনসি লেদ
HAASST-20Y
HAASST-20Y
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Cuggiono
৭,৫২৬ km
CNC টার্নিং ও মিলিং সেন্টার
DOOSANPUMA V400M-R
DOOSANPUMA V400M-R
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে




























































































