3D প্রিন্টার

SERON Ploter Drukujący 3D Print

Technical data

Control system: multi-axis real-time interpolator with active trajectory prediction. Communication via LAN, EtherCat, sampling time below 1 ms, correction map, RTCP, remote service access.

Working area: 1500 – 3000 x 2100 – 12000 mm

Z-axis clearance: 500 – 1200 mm

Drive system: Servo drives with EtherCat protocol, X and Y axes with hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5.

Linear guidance: Trapezoidal rails

Travel speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min

Software resolution: 0.0005 mm

Positioning accuracy: 0.01 mm

Gantry drive: Dual-sided master/slave with gantry angle correction

Print heads: G.12 with output up to 12 kg/h
G.20 with output up to 20 kg/h
G.50 with output up to 50 kg/h
G.200 with output up to 200 kg/h

Construction: welded steel, ribbed, stress-relieved, precision machined

We have extensive experience with a variety of materials, including:
Itedov Ramgepfx An Uji
• Basic materials: PE, PP, ABS, PLA, PA, PC, PET, etc.
• Advanced materials: PPS, PEEK, PEKK, etc.
• Reinforced materials: carbon fiber, glass fiber, natural fibers.

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।