শিল্প চুলাSAT
শিল্প চুলা
SAT
VB ট্যাক্স (মূসক) অতিরিক্ত
১৫,০০০€
উৎপাদন বছর
২০১৪
অবস্থা
ব্যবহৃত
অবস্থান
Bron 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- শিল্প চুলা
- উৎপাদক:
- SAT
- উৎপাদন বছর:
- ২০১৪
- অবস্থা:
- প্রায় নতুন (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
VB ট্যাক্স (মূসক) অতিরিক্ত
১৫,০০০€
- অবস্থান:
- 35 Ave de la République, 69500 Bron, France

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A20683210
- আপডেট:
- সর্বশেষ ০৫.১২.২০২৫
বিবরণ
Offer Plan: No. A8 28 441
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
Caedox Dhrmspfx Ag Sea
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
Caedox Dhrmspfx Ag Sea
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2017
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+33 6 16 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে

