লেজার কাটিং মেশিনPrima Power
CV 5000

মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- লেজার কাটিং মেশিন
- উৎপাদক:
- Prima Power
- মডেল:
- CV 5000
- মেশিন নম্বর:
- 150204
- উৎপাদন বছর:
- ২০১৬
- অবস্থা:
- ব্যবহারের জন্য প্রস্তুত (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
- চলমান ঘণ্টা:
- ২৭,৮৭৫ h
প্রযুক্তিগত বিবরণ
- লেজার প্রকার:
- CO₂ লেজার
- লেজারের তরঙ্গদৈর্ঘ্য:
- ১০ nm
প্রদান
- অবস্থান:
- Hessen, জার্মানি
– দূরত্ব: আনুমানিক ৭,৪৩৩ কিমি
- উপলভ্যতা:
- নিলাম শেষ হওয়ার সাথে সাথেই
- সরবরাহের শর্তাবলী:
- FCA
২,০০০.০০€ (বাধ্যতামূলক)
বিনামূল্যে
বিবরণ
No reserve price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Laser type: CO₂ laser
Average power: 200–5,000 W
Peak power: up to 6 kW
Wavelength: 10.6 µm
Beam quality factor M²:< 2.4 (typically 2.1–2.3)
Beam divergence: 1.5 mrad (half angle)
Beam diameter at output: 15 mm (1/e)
Beam diameter at output: 21 mm (full beam)
Pulse repetition rate: 0–2 kHz
Pulse width: 250 µs
Pulse resolution: 70 µs (?)
Alignment stability: ± 150 µrad (?)
Wavelength: 635 nm
Output power:< 1 mW
MACHINE DETAILS
Ambient temperature: 10–40 °C
Relative humidity:< 95% (non-condensing)
Connected load: 37 kW
Voltage: 400–460 V AC
Voltage tolerance: ± 10%
Power supply: 3-phase
Required cooling capacity: 45 kW
Flow rate: 133 l/min
Inlet temperature: 18–20 °C
Maximum inlet pressure: 6 bar
Nominal inlet pressure: 3 bar
Differential pressure: 1.5 bar
Coolant: Distilled water with 35% Dowfrost HD
Filter rating: 100 µm
Helium purity: 99.996%
Helium concentration: 67.7%
Helium consumption: 13.4–46.8 SLPH
Carbon monoxide purity: 99.995%
Carbon monoxide concentration: 4.1%
Carbon monoxide consumption: 0.9–3.0 SLPH
Nitrogen purity: 99.996%
Nitrogen concentration: 28.2%
Nitrogen consumption: 5.8–20.2 SLPH
Total gas consumption: 20–70 SLPH
Maximum content of water vapor, hydrocarbons, and oxygen:< 10 ppm
Compressed air: dry
Compressed air dew point:< 2 °C
Operating hours (according to meter): 27,875 h
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
পেমেন্ট প্রসেসিং
- ক্রয় সংক্রান্ত অতিরিক্ত খরচ:
- ১৮ %
- পরিশোধের শর্তাবলী:
- ১০০% অগ্রিম প্রদান
- পরিশোধের পদ্ধতি:
ব্যাংক স্থানান্তর
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A22382937
- রেফারেন্স নম্বর:
- AUC-2607179
- আপডেট:
- সর্বশেষ ২১.০৭.২০২৬
- এক্সক্লুসিভ অফার:
- শুধুমাত্র নিলামে উপলব্ধ
পরিদর্শন
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ১৮ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.



























