প্রধান টাকু মোটর টাকুOmlat IMA
12 KW
প্রধান টাকু মোটর টাকু
Omlat IMA
12 KW
স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৫,৯৮০€
অবস্থা
ব্যবহৃত
অবস্থান
Lennestadt 

মেশিন সংক্রান্ত তথ্য
মূল্য এবং অবস্থান
স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৫,৯৮০€
- অবস্থান:
- Wiesengrund 7, 57368 Lennestadt, Deutschland

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A14898475
- আপডেট:
- সর্বশেষ ০৪.০৫.২০২৪
বিবরণ
Electrospindle Main spindle OMLAT IMA 12 KW
The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount.
Ncjdperhzlnsfx Anwet
1st tool holder:
Type: HSK F63, similar to DIN 69893
Taper diameter: 38 mm
2. tool retraction:
Automatically controlled
Pull-in force: 11000 N
3. tool weight:
Maximum weight: 6 kg
4. direction of rotation:
Right/left rotation, programmable
5. speed range:
Infinitely adjustable from 1500 to 22000 revolutions per minute
Programmable for individual requirements
6. drive:
Frequency-controlled three-phase motor
7. drive power:
12 KW in S-1 operation
8. spindle lubrication:
One-time factory grease lubrication for efficient maintenance
9. spindle cooling:
Water cooling to maintain optimum operating temperatures
10. constant performance:
Range from 12,000 to 22,000 revolutions per minute
Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount.
Ncjdperhzlnsfx Anwet
1st tool holder:
Type: HSK F63, similar to DIN 69893
Taper diameter: 38 mm
2. tool retraction:
Automatically controlled
Pull-in force: 11000 N
3. tool weight:
Maximum weight: 6 kg
4. direction of rotation:
Right/left rotation, programmable
5. speed range:
Infinitely adjustable from 1500 to 22000 revolutions per minute
Programmable for individual requirements
6. drive:
Frequency-controlled three-phase motor
7. drive power:
12 KW in S-1 operation
8. spindle lubrication:
One-time factory grease lubrication for efficient maintenance
9. spindle cooling:
Water cooling to maintain optimum operating temperatures
10. constant performance:
Range from 12,000 to 22,000 revolutions per minute
Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
সর্বশেষ অনলাইনে: গত সপ্তাহে
থেকে নিবন্ধিত: 2003
২১ অনলাইন বিজ্ঞাপন
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 2721 ... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
ক্ষুদ্র বিজ্ঞাপন
San Giovanni Al Natisone
৭,১৬৫ km
হট প্রেস
MANNI
MANNI
ক্ষুদ্র বিজ্ঞাপন
Marano Vicentino
৭,৩২২ km
ভিনিয়ার প্রেস
SORMEC350X130
SORMEC350X130
ক্ষুদ্র বিজ্ঞাপন
Miastko
৬,৮৩৪ km
ব্যহ্যাবরণ splicing মেশিন
KuperFWJ 920
KuperFWJ 920
ক্ষুদ্র বিজ্ঞাপন
Mariano Comense
৭,৪৯৪ km
ভিনিয়ার প্রেস
COLOMBO REMOHPC 8-160
COLOMBO REMOHPC 8-160
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে




































