ইন্ডাস্ট্রিয়াল ট্রেলার VAL30 – 25 t পেলোড

Multi-Trans VAL30

Operating conditions:
The industrial trailer is designed for use on level, paved roads in internal traffic.

Gedpfx Aouf Rt Uecxekc
Combined journeys:
The trailer components are not designed (without trailer coupling) for combined journeys with several trailers.

Payload:
The industrial trailer can be used to move loads up to a maximum of 25 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification.

Base frame:
The base frame of the industrial trailer consists of a stable welded construction made of sectional steel.

Loading area:
The size is approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The loading area is covered with softwood planks and edged with all-round edge protection.

Steering:
Four-wheel Ackermann steering, drawbar can be raised, removed and repositioned from front to rear, attachment height on towing vehicle approx. 285 - 775 mm (other attachment heights are only permitted after notification), towing eye in accordance with DIN 74054, dm 40 mm, drawbar safety catch in accordance with UVV

Chassis:
The two axles of the industrial trailer are steered. Elastic solid rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and permanent grease lubrication

Paint finish:
Top coat RAL 5002 ultramarine blue

Additional equipment:
2 lashing rods made of round steel are welded vertically into the outer beams on each of the two long sides of the industrial trailer.

For hire or sale throughout the EU.

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।