অনুভূমিক যন্ত্র কেন্দ্রMori Seiki
NMV 5000 DCG

মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- অনুভূমিক যন্ত্র কেন্দ্র
- উৎপাদক:
- Mori Seiki
- মডেল:
- NMV 5000 DCG
- উৎপাদন বছর:
- ২০১০
- অবস্থা:
- ব্যবহারের জন্য প্রস্তুত (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
প্রযুক্তিগত বিবরণ
- এক্স-অক্ষ ভ্রমণ দূরত্ব:
- ৭৩০ মিমি
- ওয়াই-অক্ষের গমন দূরত্ব:
- ৫১০ মিমি
- জেড-অক্ষের চলাচলের দূরত্ব:
- ৫১০ মিমি
- কাজের টুকরার ওজন (সর্বাধিক):
- ৩০০ কেজি
- শঙ্কু গতি (সর্বাধিক):
- ১২,০০০ আরপিএম
প্রদান
- অবস্থান:
- Noord-Brabant, নেদারল্যান্ডস
– দূরত্ব: আনুমানিক ৭,৬৩৪ কিমি
- উপলভ্যতা:
- নিলাম শেষ হওয়ার সাথে সাথেই
- সরবরাহের শর্তাবলী:
- FCA
১,০০০.০০€ (বাধ্যতামূলক)
বিনামূল্যে
বিবরণ
The spindle of the machine was recently replaced. The corresponding report can be provided on request.
TECHNICAL DETAILS
Travel X-axis: 730 mm
Travel Y-axis: 510 mm
Travel Z-axis: 510 mm
Rapid traverse X-axis: 50 m/min
Rapid traverse Y-axis: 50 m/min
Rapid traverse Z-axis: 40 m/min
Table width: 500 mm
Table height: 870 mm
Table length: 500 mm
Table load capacity: 300 kg
Rotary table diameter: 500 mm
Rotational speed (max.): 1,200 rpm
Spindle speed (max.): 12,000 rpm
Spindle taper: HSK-A63
Workpiece height (max.): 450 mm
Workpiece weight (max.): 300 kg
Tool length: 300 mm
Tool diameter: 125 mm
Tool weight: 8,000 g
Number of tool magazine slots: 180
MACHINE DETAILS
Control: Siemens 840 D
Total weight: 14,800 kg
Input voltage: 400 V
EQUIPMENT
Mori Seiki manual for tool usage
KNOLL FKA/500 belt filter system + 3 filter rolls
Filtermist FX5000 emulsion extraction
Renishaw OMP60 3D probe
Chip conveyor
Spindle chiller
Documentation + circuit diagrams
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
পেমেন্ট প্রসেসিং
- ক্রয় সংক্রান্ত অতিরিক্ত খরচ:
- ১৮ %
- পরিশোধের শর্তাবলী:
- ১০০% অগ্রিম প্রদান
- পরিশোধের পদ্ধতি:
ব্যাংক স্থানান্তর
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A20729397
- রেফারেন্স নম্বর:
- AUC-2512051
- আপডেট:
- সর্বশেষ ১১.১২.২০২৫
- এক্সক্লুসিভ অফার:
- শুধুমাত্র নিলামে উপলব্ধ
পরিদর্শন
Noord-Brabant KERNCD 650
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ১৮ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.

































