C-অক্ষসহ CNC টার্নিং সেন্টার, ১২টি চালিত টুলMonforts
RNC 500 AC
C-অক্ষসহ CNC টার্নিং সেন্টার, ১২টি চালিত টুল
Monforts
RNC 500 AC
উৎপাদন বছর
২০০৩
অবস্থা
ব্যবহৃত
(সম্পূর্ণ ক্রিয়াশীল)
অবস্থান
Vreden 

মৌলিক তথ্য
- মেশিনের নাম:
- C-অক্ষসহ CNC টার্নিং সেন্টার, ১২টি চালিত টুল
- উৎপাদক:
- Monforts
- মডেল:
- RNC 500 AC
- উৎপাদন বছর:
- ২০০৩
- অবস্থা:
- ব্যবহারের জন্য প্রস্তুত (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
- অবস্থান:
- 48691 Vreden, Deutschland

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A23347211
- রেফারেন্স নম্বর:
- 1126-100001
- আপডেট:
- সর্বশেষ ১৭.১১.২০২৬
বিবরণ
CNC turning and milling center Monforts RNC 500 AC, year of manufacture 2003, with GE Fanuc 21i-TB, C-axis and 12-position turret from Sauter (VDI 50, all stations powered). The machine was in production until 2026 and was sold due to a restructuring of the manufacturing process. On November 17, 2026, we saw it running: reference run, spindle and turret operate perfectly.
Equipment:
- GE Fanuc Series 21i-TB control unit with Monforts control panel
- C-axis for drilling and milling operations
- Sauter tool turret, 12 stations, VDI 50, all powered
- Power chuck SMW-Autoblok KNCS-N 315 (Ø 315 mm, 3 jaws)
- Tailstock
- Hydraulic, self-centering steady rest
Hnsdpfx Ao Akuanoh Hsw
- Chip conveyor (hinged belt)
Included accessories as shown in the photos:
- Several powered tool holders Coromant Capto (up to 3,000 rpm, 150 Nm)
- Extensive set of VDI-50 tool holders (boring bar, drilling bar and collet chuck holders)
- Documentation including programming instructions, tool list
- Backup of CNC parameters
Condition and maintenance: Hydraulic hoses renewed approximately two years ago, buffer battery renewed, parameter backup available. Electrical connection 400 V / 50 Hz, 63 A, 41 kVA.
Inspection while running is possible by appointment at the Vreden location. If desired, we will take over transport, installation and commissioning.
Kraft Werkzeugmaschinen GmbH, member of the FDM. Call or write to us, and we will gladly send you videos of the test run.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Equipment:
- GE Fanuc Series 21i-TB control unit with Monforts control panel
- C-axis for drilling and milling operations
- Sauter tool turret, 12 stations, VDI 50, all powered
- Power chuck SMW-Autoblok KNCS-N 315 (Ø 315 mm, 3 jaws)
- Tailstock
- Hydraulic, self-centering steady rest
Hnsdpfx Ao Akuanoh Hsw
- Chip conveyor (hinged belt)
Included accessories as shown in the photos:
- Several powered tool holders Coromant Capto (up to 3,000 rpm, 150 Nm)
- Extensive set of VDI-50 tool holders (boring bar, drilling bar and collet chuck holders)
- Documentation including programming instructions, tool list
- Backup of CNC parameters
Condition and maintenance: Hydraulic hoses renewed approximately two years ago, buffer battery renewed, parameter backup available. Electrical connection 400 V / 50 Hz, 63 A, 41 kVA.
Inspection while running is possible by appointment at the Vreden location. If desired, we will take over transport, installation and commissioning.
Kraft Werkzeugmaschinen GmbH, member of the FDM. Call or write to us, and we will gladly send you videos of the test run.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
জার্মানি
৭,৪৬৪ km
সিএনসি টার্নিং এবং মিলিং সেন্টার
MONFORTSRNC 500 AC
MONFORTSRNC 500 AC
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Kreuztal
৭,৪৭১ km
চক্র নিয়ন্ত্রিত ল্যাথ
MONFORTSRNC500 AC 1500 x 300 mm
MONFORTSRNC500 AC 1500 x 300 mm
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে















































