চিপার, কাঠ কুটন মেশিন
mütek MGZ 1030 - 22 kW

উৎপাদন বছর
২০২৫
অবস্থা
ব্যবহৃত
অবস্থান
Neckartailfingen জার্মানি
চিপার, কাঠ কুটন মেশিন mütek MGZ 1030 - 22 kW
more Images
mütek MGZ 1030 - 22 kW
ছবিগুলি দেখায়
মানচিত্র দেখান

মেশিন সংক্রান্ত তথ্য

মেশিনের নাম:
চিপার, কাঠ কুটন মেশিন
উৎপাদক:
mütek
মডেল:
MGZ 1030 - 22 kW
উৎপাদন বছর:
২০২৫
অবস্থা:
প্রায় নতুন (ব্যবহৃত)
কার্যকারিতা:
সম্পূর্ণ ক্রিয়াশীল
চলমান ঘণ্টা:
৫৫ h

মূল্য এবং অবস্থান

অবস্থান:
Grienweg 38, 72666 Neckartailfingen, Deutschland জার্মানি
কল করুন

প্রস্তাবের বিবরণ

বিজ্ঞাপন আইডি:
A20648835
আপডেট:
সর্বশেষ ০১.১২.২০২৫

বিবরণ

Machine with special rotor
Available immediately

Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades

*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.

Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)

Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg

Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant

The following options are available at extra cost:
*Visible in the last 2 images.

- Additional blade row + €2,790
Bedpex Af Rdjfx Ag Sslr
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net

Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।

যোগানদাতা

থেকে নিবন্ধিত: 2005

৪৮ অনলাইন বিজ্ঞাপন

Trustseal Icon
কল করুন

অনুরোধ পাঠান

ভূমিus 
জার্মানি
অস্ট্রিয়া
সুইজারল্যান্ড
মার্কিন যুক্তরাষ্ট্র
যুক্তরাজ্য
ফ্রান্স
বেলজিয়াম
স্পেন
মেক্সিকো
ইতালি
নেদারল্যান্ডস
পোল্যান্ড
রুশ ফেডারেশন
বেলারুশ (বেলারুশ প্রজাতন্ত্র)
ইউক্রেন
এস্তোনিয়া
তুরস্ক
নিউজিল্যান্ড
আয়ারল্যান্ড
চেক প্রজাতন্ত্র
ডেনমার্ক
ফিনল্যান্ড
সুইডেন
নরওয়ে
লুক্সেমবার্গ
গ্রীস
লিথুয়ানিয়া
লাতভিয়া
আইসল্যান্ড
পর্তুগাল
ব্রাজিল
ভেনেজুয়েলা
আর্জেন্টিনা
হাঙ্গেরি
স্লোভাকিয়া
রোমানিয়া
মলডোভা
স্লোভেনিয়া
সার্বিয়া
মন্টিনিগ্রো
আলবেনিয়া
ক্রোয়েশিয়া
বুলগেরিয়া
উত্তর ম্যাসেডোনিয়া
বসনিয়া ও হার্জেগোভিনা
ইসরায়েল
মিশর
মরক্কো
ভারত
ইন্দোনেশিয়া
দক্ষিণ কোরিয়া
জাপান
থাইল্যান্ড
মালয়েশিয়া
ভিয়েতনাম
China
তাইওয়ান
ইরান
বাংলাদেশ
বিঃদ্রঃ: আপনার অনুরোধটি যন্ত্রপাতি বিভাগের সকল বিক্রেতার নিকট পাঠানো হবে। এভাবে আপনি অনেকগুলো অফার পেতে পারেন।
অনুরোধ পাঠানো যায়নি। পরে আবার চেষ্টা করুন।

টেলিফোন & ফ্যাক্স

+49 711 5... বিজ্ঞাপন