কম লোডারMüller-Mitteltal
T40
কম লোডার
Müller-Mitteltal
T40
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
১৪,৩০০€
উৎপাদন বছর
১৯৯৫
অবস্থা
ব্যবহৃত
অবস্থান
Triptis 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- কম লোডার
- উৎপাদক:
- Müller-Mitteltal
- মডেল:
- T40
- মেশিন নম্বর:
- 39500
- উৎপাদন বছর:
- ১৯৯৫
- অবস্থা:
- ব্যবহৃত
মূল্য এবং অবস্থান
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
১৪,৩০০€
- অবস্থান:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE

কল করুন
প্রযুক্তিগত বিবরণ
- অ্যাক্সেল কনফিগারেশন:
- ৩টি অ্যাক্সেল
- মোট ওজন:
- ৪০,০০০ কেজি
- খালি ওজন:
- ৮,২৫০ কেজি
- সর্বাধিক বোঝার ওজন:
- ৩১,৭৫০ কেজি
- প্রথম নিবন্ধন:
- ০৫/১৯৯৫
- টায়ারের আকার:
- 235/75 r17,5 zwilling
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A8265317
- রেফারেন্স নম্বর:
- 20590000
- আপডেট:
- সর্বশেষ ০৬.০৫.২০২৫
বিবরণ
Further information
Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device
Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake
Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation!
24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate
Lhodpoi Rixgjfx Ab Hen
Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm
Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports
steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device
Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake
Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation!
24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate
Lhodpoi Rixgjfx Ab Hen
Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm
Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports
steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2006
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 36482... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
ক্ষুদ্র বিজ্ঞাপন
Schwebheim
৭,৩৩৩ km
লোডার ট্রেলার
Müller MitteltalT4 PROFI 40,0 4 Achs Tiefladeranhänger
Müller MitteltalT4 PROFI 40,0 4 Achs Tiefladeranhänger
ক্ষুদ্র বিজ্ঞাপন
Diespeck
৭,৩১৪ km
কম লোডার
Müller-MitteltalT4 kompakt 40,0
Müller-MitteltalT4 kompakt 40,0
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে





























