অভ্যন্তরীণ horizontal broaching মেশিনKarl Klink
RW 5
অভ্যন্তরীণ horizontal broaching মেশিন
Karl Klink
RW 5
উৎপাদন বছর
১৯৬২
অবস্থা
ব্যবহৃত
অবস্থান
Hövelhof 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- অভ্যন্তরীণ horizontal broaching মেশিন
- উৎপাদক:
- Karl Klink
- মডেল:
- RW 5
- মেশিন নম্বর:
- 1790
- উৎপাদন বছর:
- ১৯৬২
- অবস্থা:
- ব্যবহৃত
মূল্য এবং অবস্থান
- বিক্রেতার অবস্থান:
- Mergelweg 206, 33161 Hövelhof, জার্মানি

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A3473064
- রেফারেন্স নম্বর:
- WKG 1614
- আপডেট:
- সর্বশেষ ০১.০৭.২০২৪
বিবরণ
creator: Karl Klink
Model: RW 5
year of construction: 1962
weight: ca. 2500 KG
machine. No.:1790
General / technical data:
hydraulic horizontal internal broaching machine in a good working condition
clearing stroke: 1320mm
turning: 1 piece
pulling force: 5000 KG at 3m/min (3000KG at 7m/min)
Clamping tool: universal drawing head for flat shafts
Through hole in clamping table: Ø 100mm
Workpiece diameter: max. 420mm (due to the oil and spit trough)
Hedodl Uzkopfx Aggsw
cutting speed: hydraulically infinitely variable from 1m/min to 7m/min
Return speed: hydraulically infinitely variable from 7m/min to 25m/min
Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area)
Power supply: 380Volt / 50 HZ / 15A
hydraulic motor: 4 KW
Accessories / special equipment:
- the machine is equipped with a universal pulling head for flat shafts
- Coolant / lubricant system
- without tool feeder
- short oil and oil sump (approx. 900mm)
Remarks:
The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Model: RW 5
year of construction: 1962
weight: ca. 2500 KG
machine. No.:1790
General / technical data:
hydraulic horizontal internal broaching machine in a good working condition
clearing stroke: 1320mm
turning: 1 piece
pulling force: 5000 KG at 3m/min (3000KG at 7m/min)
Clamping tool: universal drawing head for flat shafts
Through hole in clamping table: Ø 100mm
Workpiece diameter: max. 420mm (due to the oil and spit trough)
Hedodl Uzkopfx Aggsw
cutting speed: hydraulically infinitely variable from 1m/min to 7m/min
Return speed: hydraulically infinitely variable from 7m/min to 25m/min
Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area)
Power supply: 380Volt / 50 HZ / 15A
hydraulic motor: 4 KW
Accessories / special equipment:
- the machine is equipped with a universal pulling head for flat shafts
- Coolant / lubricant system
- without tool feeder
- short oil and oil sump (approx. 900mm)
Remarks:
The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
নথিপত্র
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2003
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 5257 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে












