কাজ করার প্ল্যাটফর্ম সহ সেমিট্রেইলার

KÖGEL Multi Chassis. verstärkt, Rungen

You can find our complete range of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the equipment features. Full equipment details available upon request.

Chassis:
* Standard ladder-type frame in lightweight steel with full-length cross members
* With arched chassis frame
* Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337

Running Gear:
* Axle lift mechanism on axle 1
* Fully automatic, load-dependent axle lift control
* Traction aid: activation by pressing the brake three times, allowing 30% overload up to a speed of 25 km/h
* Brand of choice: Kögel—three-axle aggregate with disc brakes Ø approx. 430 mm
* Air suspension providing approx. 180 mm stroke

Vehicle Tyres:
* Wheels with internal sensors according to UN ECE R141
* Tyres: six 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L)
* Six steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments:
Nedpfx Ajyvnd Aebzjkw
* Landing legs (brand of choice: Kögel), mechanical type with compensation foot, load capacity approx. 24 t. Operable from right-hand side in direction of travel
* Spray suppression system in compliance with Regulation (EU) No. 109/2011 for three-axle units with 385/65 R22.5 tyres, consisting of one pair of quarter-circle fenders ahead of the axles, one pair of straight fenders with spray flaps between first and second axle, and one pair of quarter-circle fenders with spray flaps behind the axles
* 2 wheel chocks with holders
* Lateral protection according to ECE-R73
* 2 watertight plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm. Mounted at rear, one left and one right
* Rear right retractable access ladder
* High, rigid rear underrun protection made of steel according to ECE-R58
* One pair each of extendable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and connector. Positioned at the front and rear of the vehicle

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS electrical connection ISO 7638 (without connecting cables), parking brake as spring-loaded brake, external pneumatic connections, and external EBS diagnostic port via ISO 7638 connector
* EBS system (brand of choice: Kögel)
* Air suspension system incl. 1 lifting/lowering valve, mounted left behind axle assembly in direction of travel. Driving position self-leveling
* 2 fail-safe coupling heads at the front, ISO 1728
* Brake and air supply tanks made of steel (EN 286-2)

Floor:
* Panel floor approx. 30 mm thick
* Floor sealed all around
* Stake pockets for square tube stakes approx. 80 x 80 mm

Front Wall:
* Storage for up to 20 square tube stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside front wall
* Front wall approx. 2,000 mm high with volume corner posts made of steel, fitted with profiled steel sheeting, bolted/riveted to the frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the bulkhead according to EN 12640

Side Wall:
* VarioFix external steel lashing frame
* 21 pairs of lashing rings in the external frame (EN 12640), permissible tensile force approx. 5,000 kg per ring

Bumper Protection:
* 1 pair of steel bump stops approx. 160x85x85 mm mounted on the outer rear frame end plate
* Transverse galvanized steel angle as forklift protection, as well as center locking cam protection, mounted on the rear frame end plate

Electrics / Electronics

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।