ইউরোকার্গো ১২০ই২৮০Iveco
EUROCARGO 120E280
ইউরোকার্গো ১২০ই২৮০
Iveco
EUROCARGO 120E280
উৎপাদন বছর
২০২৪
অবস্থা
নতুন
অবস্থান
Brescia 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- ইউরোকার্গো ১২০ই২৮০
- উৎপাদক:
- Iveco
- মডেল:
- EUROCARGO 120E280
- উৎপাদন বছর:
- ২০২৪
- অবস্থা:
- নতুন
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
- অবস্থান:
- Via Achille Grandi 25, 25125 Brescia, IT

- ভাড়া:
- সম্ভব
কল করুন
প্রযুক্তিগত বিবরণ
- প্রথম নিবন্ধন:
- ১১/২০২৪
- মোট ওজন:
- ১২,০০০ কেজি
- জ্বালানীর ধরন:
- ডিজেল
- রঙ:
- সাদা
- জ্বালানী:
- ডিজেল
- ব্রেক:
- ইনটারডার
- ড্রাইভারের কেবিন:
- অন্যান্য
- গিয়ারিং প্রকার:
- স্বয়ংক্রিয়
- সাসপেনশন:
- বায়ু/বায়ু
- সরঞ্জাম:
- অতিরিক্ত হেডলাইট, অনবোর্ড কম্পিউটার, এবিএস, এয়ার কন্ডিশনিং, কুলিং ইউনিট, ক্রুজ কন্ট্রোল, ক্র্যাশন কন্ট্রোল, টেইল-লিফট, ব্লুটুথ, রিটার্ডার, স্পয়লার
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A19300251
- আপডেট:
- সর্বশেষ ১৬.০৬.২০২৫
বিবরণ
AXLE CONFIGURATION 4X2
CABIN MLC DAYTIME CAB
DRIVERS' SIDE LEFT HAND DRIVE
ENGINE POWER TECTOR 7 (1000 NM) 6.7 LT - 6L
GEARBOX EUROTRONIC 12 GEARS
GVW 12 - 14 TON
AXLE SINGLE REDUCTION
REAR PNEUMATIC SUSPENSION
BRAKES DISC BRAKES (FRONT/REAR)
USE STANDARD USE
SINGLE CAB VERSION
Todpowp U R Nefx Agged
WHEELBASE 3690 MM
COLOUR 50105 - POLAR WHITE
TYRES 20074 - TYRES 245/70R19.5 (R)28
HILL HOLDER
FRC EQUIPMENT
ext. dimensions of 5500 x 2590 x 2500H (mm);
or internal dimensions of 5330 x 2450 x 2300H (mm);
equipment including: thicknesses: side walls = 70 mm - rear doors = 70 mm - roof, front wall and floor =
100 mm; double-leaf rear door (6 stainless steel hinges - external stainless steel locks with snap opening); internal lighting
(3 central LED lights); stainless steel rear panel; external aluminium profiles (front with aerodynamic chamfer
and lower with recess for white reflective strip); rear access handle; standard retro-reflective panels and strips;
rear bumper pads; hot-dip galvanised subframe; rear mudguards; toolbox,
side cyclist protection (stainless steel supports with joint and approved aluminium bars); LED contour lights; floor with
self-supporting and reinforced structure (rice grain aluminium surface - 2.7 mm); drain hole with fiberglass tray;
o reinforced roof for load-securing poles and for possible sliding bulkhead;
o stainless steel provision for tail lift stop;
o 300 mm internal perimeter aluminum bumper strip;
o recessed lateral load-securing racks (one per side 1000 mm from the floor);
o 1000 mm right side door positioned 150 mm from the external front end;
o THERMO KING T 600 assembly supplied by you (overhanging assembly above the cabin - including assembly of kit 4.0);
o ANTEO F4RE 22 AM retractable tail lift complete with foot controls and roll stop;
o MCTC testing + international ATP certification (FRC class):
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
CABIN MLC DAYTIME CAB
DRIVERS' SIDE LEFT HAND DRIVE
ENGINE POWER TECTOR 7 (1000 NM) 6.7 LT - 6L
GEARBOX EUROTRONIC 12 GEARS
GVW 12 - 14 TON
AXLE SINGLE REDUCTION
REAR PNEUMATIC SUSPENSION
BRAKES DISC BRAKES (FRONT/REAR)
USE STANDARD USE
SINGLE CAB VERSION
Todpowp U R Nefx Agged
WHEELBASE 3690 MM
COLOUR 50105 - POLAR WHITE
TYRES 20074 - TYRES 245/70R19.5 (R)28
HILL HOLDER
FRC EQUIPMENT
ext. dimensions of 5500 x 2590 x 2500H (mm);
or internal dimensions of 5330 x 2450 x 2300H (mm);
equipment including: thicknesses: side walls = 70 mm - rear doors = 70 mm - roof, front wall and floor =
100 mm; double-leaf rear door (6 stainless steel hinges - external stainless steel locks with snap opening); internal lighting
(3 central LED lights); stainless steel rear panel; external aluminium profiles (front with aerodynamic chamfer
and lower with recess for white reflective strip); rear access handle; standard retro-reflective panels and strips;
rear bumper pads; hot-dip galvanised subframe; rear mudguards; toolbox,
side cyclist protection (stainless steel supports with joint and approved aluminium bars); LED contour lights; floor with
self-supporting and reinforced structure (rice grain aluminium surface - 2.7 mm); drain hole with fiberglass tray;
o reinforced roof for load-securing poles and for possible sliding bulkhead;
o stainless steel provision for tail lift stop;
o 300 mm internal perimeter aluminum bumper strip;
o recessed lateral load-securing racks (one per side 1000 mm from the floor);
o 1000 mm right side door positioned 150 mm from the external front end;
o THERMO KING T 600 assembly supplied by you (overhanging assembly above the cabin - including assembly of kit 4.0);
o ANTEO F4RE 22 AM retractable tail lift complete with foot controls and roll stop;
o MCTC testing + international ATP certification (FRC class):
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2021
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+39 371 3... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে
















