থার্মোফর্মিং মেশিনIllig
UA 100 4G Solo/ BE
থার্মোফর্মিং মেশিন
Illig
UA 100 4G Solo/ BE
অবস্থা
ব্যবহৃত
অবস্থান
Möckmühl 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- থার্মোফর্মিং মেশিন
- উৎপাদক:
- Illig
- মডেল:
- UA 100 4G Solo/ BE
- অবস্থা:
- ওয়ার্কশপ পুনর্নীরিক্ষিত (ব্যবহৃত)
মূল্য এবং অবস্থান
- অবস্থান:
- Zeppelinstraße 1, 74219 Möckmühl, DE
কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A19029536
- আপডেট:
- সর্বশেষ ০৬.১০.২০২৫
বিবরণ
Max. forming area: 960 x 660 mm
Min. forming area: 210 x 170 mm
Max. sheet size: 1000 x 700 mm
Min. sheet size: 310 x 210 mm
Max. sheet thickness (manual feeding): 12 mm
Max. sheet thickness (automatic feeding): 10 mm
Max. tool height: 490 mm
Max. draw depth: 300 mm (positive/negative)
Total power consumption: approx. 64.0 kW / 115 A
Technical features:
- Siemens Simatic S7-300 control, OP 37 panel
- Air-conditioned control cabinet
- Top heater with 5 temperature control circuits via pilot emitters
- Bottom heater with 5 temperature control circuits via pilot emitters
- Individually switchable top heating elements
- Individually switchable bottom heating elements
- Parallel clamping frame
- Pneumatic motor locking for the upper reduction frame
- Cylinder locking for the lower reduction frame
- 4 cooling fans
- Adjustable vacuum for the lower table via cascade control
- Pre-blow and demolding adjustable via cascade control
- Large front opening for tool change
- Film sag control by photocell with support air
- Automatic tool change system
Lower table:
Godpfx Aswf Dvajcxeuh
1. Tool clamping via vacuum
2. Tool change via pneumatically operated ball rollers
Upper punch:
1. Motorized remote adjustment for stroke limitation
2. Pneumatic quick-change system for tools
Sheet feeding:
- Automatic motorized lifting of the film transport chain
- With pneumatic quick-clamping system for vacuum plates
- Motorized centering of plastic sheets
- Separate vacuum pump for grained material
Optional preheating retrofit:
- Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch
- Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch
- Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel)
Optional retrofit for roll processing:
- Cross cutter and feeding rollers in feed area
- RO 800 roll stand
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Min. forming area: 210 x 170 mm
Max. sheet size: 1000 x 700 mm
Min. sheet size: 310 x 210 mm
Max. sheet thickness (manual feeding): 12 mm
Max. sheet thickness (automatic feeding): 10 mm
Max. tool height: 490 mm
Max. draw depth: 300 mm (positive/negative)
Total power consumption: approx. 64.0 kW / 115 A
Technical features:
- Siemens Simatic S7-300 control, OP 37 panel
- Air-conditioned control cabinet
- Top heater with 5 temperature control circuits via pilot emitters
- Bottom heater with 5 temperature control circuits via pilot emitters
- Individually switchable top heating elements
- Individually switchable bottom heating elements
- Parallel clamping frame
- Pneumatic motor locking for the upper reduction frame
- Cylinder locking for the lower reduction frame
- 4 cooling fans
- Adjustable vacuum for the lower table via cascade control
- Pre-blow and demolding adjustable via cascade control
- Large front opening for tool change
- Film sag control by photocell with support air
- Automatic tool change system
Lower table:
Godpfx Aswf Dvajcxeuh
1. Tool clamping via vacuum
2. Tool change via pneumatically operated ball rollers
Upper punch:
1. Motorized remote adjustment for stroke limitation
2. Pneumatic quick-change system for tools
Sheet feeding:
- Automatic motorized lifting of the film transport chain
- With pneumatic quick-clamping system for vacuum plates
- Motorized centering of plastic sheets
- Separate vacuum pump for grained material
Optional preheating retrofit:
- Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch
- Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch
- Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel)
Optional retrofit for roll processing:
- Cross cutter and feeding rollers in feed area
- RO 800 roll stand
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2006
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 6298 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে