লো লোডার সেমিট্রেইলারGOLDHOFER
STZ-VLS4-37/80 Tiefbett + SX 1-25/80 Dolly
লো লোডার সেমিট্রেইলার
GOLDHOFER
STZ-VLS4-37/80 Tiefbett + SX 1-25/80 Dolly
স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৪৯,৯৫০€
অবস্থা
ব্যবহৃত
অবস্থান
Stadum 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
মূল্য এবং অবস্থান
স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৪৯,৯৫০€
- বিক্রেতার অবস্থান:
- Nicolaus-Büchert-Straße 4a, 25917 Stadum, জার্মানি

কল করুন
প্রযুক্তিগত বিবরণ
- সর্বাধিক বোঝার ওজন:
- ৪২,৪০০ কেজি
- মোট ওজন:
- ৬৪,০০০ কেজি
- অ্যাক্সেল কনফিগারেশন:
- ৩টি অ্যাক্সেল
- প্রথম নিবন্ধন:
- ০১/২০১১
- সরঞ্জাম:
- এবিএস
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A20890272
- রেফারেন্স নম্বর:
- 5495 + 5496
- আপডেট:
- সর্বশেষ ০৮.০১.২০২৬
বিবরণ
Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck
----* Manufacturer: Goldhofer
* Type: STZ-VLS4-37/80
* First registered: 01/2011
* Color: yellow
* Total weight: 64,000 kg
* Empty weight according to vehicle registration document: 21,600 kg
* Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering
* Steering knuckle axles up to max. 45 degrees
* Tires: 235/75 R17.5 approx. 70%
* Suspension: Air suspension with lifting and lowering
* EBS Wabco
* Removable gooseneck with aluminum side walls
* Hydraulic cylinders for support on the tractor unit
* Toolbox with flap at the front of the gooseneck
* Controls and pressure gauge on the left of the gooseneck
* Gooseneck designed for freely rotating 1-axle dollies
* Low bed for the chassis can be raised and lowered hydraulically
* Chassis with excavator trough (starts from the 2nd axle)
* Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm)
* Wooden planks to bridge the gap between the widenings
* Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position)
* 2x fixed driving heights:
* 1st driving height 925mm +100mm/-100mm
* 2nd driving height 885mm +100mm/-100mm
* 2 pairs of retractable lashing eyes in the gooseneck floor
* 5 pairs of retractable lashing eyes in the low bed floor
* 5 pairs of side lashing eyes on the low bed chassis
* 4 pairs of stake holes in the low bed floor
* 3 pairs of retractable lashing eyes in the chassis floor
* 2 pairs of side lashing eyes on the chassis chassis
* 2 pairs of stake holes in the chassis floor
* 2x lashing eyes in the excavator trough
* Rear of the vehicle sloped 10 degrees
* 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear
* Operation of hydraulic ramps + supports at the rear left
* Smartboard at the rear right
* Additional LED reversing lights on the gooseneck and at the rear of the low loader
* 1st hand
German vehicle!! German papers!! 1st hand!!
Goldhofer SX 1-25/80 Dolly
Gbodpfex Suzajx Adrsg
----* Manufacturer: Goldhofer
* Type: SX 1-25/80
* First registered: 03/2011
* Color: Yellow
* Total weight: 28,000 kg
* Empty weight according to vehicle registration document: 2,750 kg
* Axles: 1x BPW axle
* Tires: 235/75 R17.5 approx. 70% / twin tires
* 3" fifth wheel plate
* Single fender
* Supports
* Loading manometer
* 1st hand
German vehicle!! German papers!!
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
----* Manufacturer: Goldhofer
* Type: STZ-VLS4-37/80
* First registered: 01/2011
* Color: yellow
* Total weight: 64,000 kg
* Empty weight according to vehicle registration document: 21,600 kg
* Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering
* Steering knuckle axles up to max. 45 degrees
* Tires: 235/75 R17.5 approx. 70%
* Suspension: Air suspension with lifting and lowering
* EBS Wabco
* Removable gooseneck with aluminum side walls
* Hydraulic cylinders for support on the tractor unit
* Toolbox with flap at the front of the gooseneck
* Controls and pressure gauge on the left of the gooseneck
* Gooseneck designed for freely rotating 1-axle dollies
* Low bed for the chassis can be raised and lowered hydraulically
* Chassis with excavator trough (starts from the 2nd axle)
* Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm)
* Wooden planks to bridge the gap between the widenings
* Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position)
* 2x fixed driving heights:
* 1st driving height 925mm +100mm/-100mm
* 2nd driving height 885mm +100mm/-100mm
* 2 pairs of retractable lashing eyes in the gooseneck floor
* 5 pairs of retractable lashing eyes in the low bed floor
* 5 pairs of side lashing eyes on the low bed chassis
* 4 pairs of stake holes in the low bed floor
* 3 pairs of retractable lashing eyes in the chassis floor
* 2 pairs of side lashing eyes on the chassis chassis
* 2 pairs of stake holes in the chassis floor
* 2x lashing eyes in the excavator trough
* Rear of the vehicle sloped 10 degrees
* 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear
* Operation of hydraulic ramps + supports at the rear left
* Smartboard at the rear right
* Additional LED reversing lights on the gooseneck and at the rear of the low loader
* 1st hand
German vehicle!! German papers!! 1st hand!!
Goldhofer SX 1-25/80 Dolly
Gbodpfex Suzajx Adrsg
----* Manufacturer: Goldhofer
* Type: SX 1-25/80
* First registered: 03/2011
* Color: Yellow
* Total weight: 28,000 kg
* Empty weight according to vehicle registration document: 2,750 kg
* Axles: 1x BPW axle
* Tires: 235/75 R17.5 approx. 70% / twin tires
* 3" fifth wheel plate
* Single fender
* Supports
* Loading manometer
* 1st hand
German vehicle!! German papers!!
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2016
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 4662 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে














































































