উল্লম্ব টার্নিং লেদGildemeister
CTV 200
উল্লম্ব টার্নিং লেদ
Gildemeister
CTV 200
শুরুর মূল্য
৭,৫০০€
উৎপাদন বছর
২০০২
অবস্থা
ব্যবহৃত
(সম্পূর্ণ ক্রিয়াশীল)
অবস্থান
Județul Brașov 

নিলাম পর্যবেক্ষণ করুন
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- উল্লম্ব টার্নিং লেদ
- উৎপাদক:
- Gildemeister
- মডেল:
- CTV 200
- মেশিন নম্বর:
- 06810000041
- উৎপাদন বছর:
- ২০০২
- অবস্থা:
- ব্যবহারের জন্য প্রস্তুত (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
- চলমান ঘণ্টা:
- ৭৭,১১৯ h
প্রযুক্তিগত বিবরণ
- ঘূর্ণন গতি (সর্বাধিক):
- ৬,০০০ আরপিএম
- স্পিন্ডল ছিদ্র:
- ৫৬ মিমি
- স্পিন্ডল ব্যাস:
- ৯০ মিমি
- খালি ওজন:
- ৬,০০০ কেজি
প্রদান
- অবস্থান:
- Județul Brașov, রোমানিয়া
– দূরত্ব: আনুমানিক ৬,২২৬ কিমি
- উপলভ্যতা:
- নিলাম শেষ হওয়ার সাথে সাথেই
- সরবরাহের শর্তাবলী:
- FCA
বিতরণ ও লোডিং খরচ:
১,৪০০.০০€ (বাধ্যতামূলক)
১,৪০০.০০€ (বাধ্যতামূলক)
সাইটে সংগ্রহ করুন:
বিনামূল্যে
বিনামূল্যে
শিপিং খরচ:
বিবরণ
TECHNICAL DETAILS
X-axis travel: 800 mm
Z-axis travel: 300 mm
Rapid traverse rate X: 100 m/min
Rapid traverse rate Z: 45 m/min
Chuck diameter: 200 mm
Spindle head, flat flange: F140 h5
Spindle diameter in the front bearing: 90 mm
Spindle bore: 56 mm
C-axis
Speed range: 0–100 RPM
Torque, holding torque brake: 240 Nm
Accuracy in point positioning: < 0.02 degrees
Number of tool stations: 12
Cylindrical shank diameter: 40 mm
Drive power, 40% duty cycle: 10.8 kW
Torque: 28 Nm
Speed: max. 6,000 RPM
MACHINE DETAILS
Power of the three-phase main drive: 25 kW
Torque, 100% duty cycle: 160 Nm
Speed range: 20–7,000 RPM
Electrical data
Power: 25/35 kW
Voltage: 400 V / 50 Hz
Control voltage: 24 V DC
Hydraulics
Total content: approx. 25 l
Pressure: 80 bar
Pressure for clamping device: max. 700 bar
Coolant system
Content: approx. 190 l
Pump power: 1.7 kW
Flow rate at 6 bar: 20 l/min
Weight: approx. 6,000 kg
Operating hours: 77,119 h
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
X-axis travel: 800 mm
Z-axis travel: 300 mm
Rapid traverse rate X: 100 m/min
Rapid traverse rate Z: 45 m/min
Chuck diameter: 200 mm
Spindle head, flat flange: F140 h5
Spindle diameter in the front bearing: 90 mm
Spindle bore: 56 mm
C-axis
Speed range: 0–100 RPM
Torque, holding torque brake: 240 Nm
Accuracy in point positioning: < 0.02 degrees
Number of tool stations: 12
Cylindrical shank diameter: 40 mm
Drive power, 40% duty cycle: 10.8 kW
Torque: 28 Nm
Speed: max. 6,000 RPM
MACHINE DETAILS
Power of the three-phase main drive: 25 kW
Torque, 100% duty cycle: 160 Nm
Speed range: 20–7,000 RPM
Electrical data
Power: 25/35 kW
Voltage: 400 V / 50 Hz
Control voltage: 24 V DC
Hydraulics
Total content: approx. 25 l
Pressure: 80 bar
Pressure for clamping device: max. 700 bar
Coolant system
Content: approx. 190 l
Pump power: 1.7 kW
Flow rate at 6 bar: 20 l/min
Weight: approx. 6,000 kg
Operating hours: 77,119 h
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
পেমেন্ট প্রসেসিং
- ক্রয় সংক্রান্ত অতিরিক্ত খরচ:
- ১৮ %
- পরিশোধের শর্তাবলী:
- ১০০% অগ্রিম প্রদান
- পরিশোধের পদ্ধতি:
ব্যাংক স্থানান্তর
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A21981283
- রেফারেন্স নম্বর:
- AUC-2605168
- আপডেট:
- সর্বশেষ ২২.০৫.২০২৬
- এক্সক্লুসিভ অফার:
- শুধুমাত্র নিলামে উপলব্ধ
পরিদর্শন
পরিদর্শন সম্ভব
মেশিনে বিদ্যুৎ সংযোগ আছে
Machineseeker সাধারণত ব্যবহৃত যন্ত্রপাতি পরিদর্শনের সুপারিশ করে।
সকল তথ্য সর্বোত্তম জ্ঞান ও সদিচ্ছার ভিত্তিতে দেওয়া হয়েছে – অনুগ্রহ করে সরাসরি যাচাই করুন।
একই অবস্থান থেকে নিবন্ধসমূহ:
নিলাম
শেষ হবে
d
h
min
s
নিলাম শেষ হয়েছে
Județul Brașov
৬,২২৬ km
উল্লম্ব টার্নিং লেদ
INDEXV 160C
INDEXV 160C
নিলাম
শেষ হবে
d
h
min
s
নিলাম শেষ হয়েছে
Județul Brașov
৬,২২৬ km
উল্লম্ব টার্নিং লেদ
GildemeisterCTV 200
GildemeisterCTV 200
নিলাম
শেষ হবে
d
h
min
s
নিলাম শেষ হয়েছে
Județul Brașov
৬,২২৬ km
উল্লম্ব টার্নিং লেদ
GildemeisterCTV 200
GildemeisterCTV 200
নিলাম
শেষ হবে
d
h
min
s
নিলাম শেষ হয়েছে
Județul Brașov
৬,২২৬ km
উল্লম্ব টার্নিং লেদ
INDEXV 160C
INDEXV 160C
নিলাম
শেষ হবে
d
h
min
s
নিলাম শেষ হয়েছে
Județul Brașov
৬,২২৬ km
উল্লম্ব টার্নিং লেদ
EMAGVL 3 HV
EMAGVL 3 HV
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ১৮ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে


























































