এজ ব্যান্ডিং মেশিন

Format4 tempora F400 45.03 LX

TECHNICAL DETAILS
Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction

steering
x-motion plus control: Swiveling 15" smartouch
unlimited storage space for user-defined edge programs
fine-tuning of the route parameters
Optimization of edge projections when cutting front and back

chain feed
Feed speed: 9 m/min
Drive motor: 1.5 kW (S6)
precision running and guide surfaces
Minimum workpiece length: 140 mm
Minimum workpiece width: 70 mm
Segmented, rubberized support pads with quick-change system

turntable edge magazine
Roll edge material diameter: 740 mm
Roll edge material Edge thickness: 0.4 - 3 mm

pull-out frame
Workpiece support: extendable up to 450 mm
with roller conveyor for ergonomic working with larger workpieces

Upper pressure bar
Workpiece height: 8–45 mm
Pressure beam made of welded, torsion-resistant steel construction
two-row offset top pressure rollers

edge feed
Driven rubberized feed roller
Edge thickness: 0.4 - 3.0 mm

workpiece feed
Extendable workpiece support: up to 450 mm
Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter

joining unit
Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm
2x1.1 kW (1.5PS)
Chip removal: max. 2 mm
Workpiece height: max. 45 mm
Jointing cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge)

glue unit
Glue unit: Teflon coated, for 1.5 kg EVA or PUR granulate
Heating time: 10 minutes
Running meter output: 375 linear meters (for 19 mm plate)
finely adjustable glue roller

pressing unit
1 aluminum roller at a 90° angle
1 rubberized pressure roller

guillotine shears
Roll edge material thickness: 0.4 - 3 mm
Used for pre-capping, pendulum

miter saw unit
0.15 kW, speed 12,000 rpm with 90° round shaft guide
Crosscut saw unit with 45° travel with 0.35 kW, 12,000 rpm
A choice between 0° and 10° cut is possible

milling unit
Multifunctional milling unit: x-motion plus, 2 high-frequency motors, each 0.75 kW, 12,000 rpm
Interchangeable blades: 4 pieces each
Accuracy: 2-axis adjustment enables fine adjustment in the 1/100 mm range

Motorized corner rounding unit
Corner processing unit for post- and soft-forming profiles
Workpiece height: 10 - 45 mm
Edge thickness: 0.4 - 3 mm
HW milling cutter with 2 cutting edges
Radius: max. 6 mm
Workpiece length: min. 270 mm (at 19 mm height)

radius scraper unit
Processing of 2 mm plastic edges
Adjustment of the scraper via digital counter and m-motion positioning system
scanning of the workpiece contours

polishing unit
Upper and lower polishing units
spray device for cleaning agents

surface scraper
Upper and lower surface scraper for any adhesive residue.
scanning of the workpiece contours

Multifunctional milling unit for cup hinge drilling
for machining workpieces with cup hinge holes, back wall grooves and acute-angled wor