ফ্ল্যাটবেড / তর্পণFliegl
SDS 390 RoadRunner
ফ্ল্যাটবেড / তর্পণ
Fliegl
SDS 390 RoadRunner
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৯,৯০০€
উৎপাদন বছর
২০১৫
অবস্থা
ব্যবহৃত
অবস্থান
Triptis 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- ফ্ল্যাটবেড / তর্পণ
- উৎপাদক:
- Fliegl
- মডেল:
- SDS 390 RoadRunner
- মেশিন নম্বর:
- WFDFLT33902017848
- উৎপাদন বছর:
- ২০১৫
- অবস্থা:
- ব্যবহৃত
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৯,৯০০€
- অবস্থান:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

কল করুন
প্রযুক্তিগত বিবরণ
- খালি ওজন:
- ৬,৫৩৭ কেজি
- সর্বাধিক বোঝার ওজন:
- ২৮,৪৬৩ কেজি
- মোট ওজন:
- ৩৫,০০০ কেজি
- অ্যাক্সেল কনফিগারেশন:
- ৩ এক্সেল
- প্রথম নিবন্ধন:
- ১০/২০১৫
- লোডিং স্পেসের দৈর্ঘ্য:
- ১৩,৬৫০ মিমি
- লোডিং স্পেসের প্রস্থ:
- ২,৪৮০ মিমি
- লোডিং স্পেসের উচ্চতা:
- ২,৭৯০ মিমি
- টায়ারের আকার:
- 385/65 r22.5
- রঙ:
- রৌপ্য
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A9058631
- রেফারেন্স নম্বর:
- 37357
- আপডেট:
- সর্বশেষ ০৬.০৫.২০২৫
বিবরণ
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Gedpfx Adokyrmiereil
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Gedpfx Adokyrmiereil
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 36482... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে










