ফ্ল্যাটবেড এবং টারপলিন সহ আধা-ট্রেলারFLIEGL
SDS 390 Gardine Standard Ultralight Coil
ফ্ল্যাটবেড এবং টারপলিন সহ আধা-ট্রেলার
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
২৫,৯৯০€
উৎপাদন বছর
২০২১
অবস্থা
ব্যবহৃত
অবস্থান
Triptis 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- ফ্ল্যাটবেড এবং টারপলিন সহ আধা-ট্রেলার
- উৎপাদক:
- FLIEGL
- মেশিন নম্বর:
- WFDFLT33902029406
- উৎপাদন বছর:
- ২০২১
- অবস্থা:
- প্রায় নতুন (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
মূল্য এবং অবস্থান
EXW স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
২৫,৯৯০€
- অবস্থান:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

কল করুন
প্রযুক্তিগত বিবরণ
- খালি ওজন:
- ৫,৮০০ কেজি
- সর্বাধিক বোঝার ওজন:
- ২৯,২০০ কেজি
- মোট ওজন:
- ৩৫,০০০ কেজি
- অ্যাক্সেল কনফিগারেশন:
- ৩ এক্সেল
- প্রথম নিবন্ধন:
- ১২/২০২১
- লোডিং স্পেসের দৈর্ঘ্য:
- ১৩,৬৫০ মিমি
- লোডিং স্পেসের প্রস্থ:
- ২,৪৮০ মিমি
- লোডিং স্পেসের উচ্চতা:
- ২,৭৯০ মিমি
- সাসপেনশন:
- বায়ু
- টায়ারের আকার:
- 385/65 R22.5"
- রঙ:
- রৌপ্য
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A19083991
- রেফারেন্স নম্বর:
- 59340
- আপডেট:
- সর্বশেষ ০৬.০৫.২০২৫
বিবরণ
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
Gtedpfx Adowhp A Denjt
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
Gtedpfx Adowhp A Denjt
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 36482... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে








