খোলা আধা-ট্রেলার সঙ্গে তারপুলিন

Fliegl 3-Achs Gardinensattel Mega Xtra-Lock

Attention: The images are archive photos. The vehicle may be in use!
#Chassis – haulage semi-trailer
- Fifth wheel plate with replaceable 2" kingpin
- Outer frame slightly inclined, new design with "Load-Lock-Profil" for attaching lashing straps
- 24 t 2-speed landing gear, one-side operation, with straight lower section, with movable thrust compensation
- Note: free landing leg corner clearance / free swing radius to the rear approx. 1930 mm
- Pull-out ladder at rear
- Side door holders
- Rear underrun protection, galvanised steel
- Anti-spray mud flaps according to EC
- Rear corner impact protection
- Pallet stop on both sides approx. 15–20 mm high, bolted design, loading height reduced by approx. 15–20 mm
- Plastic toolbox
#Axles + suspension
- Disc brake axles with 430 mm disc diameter
- Laser-aligned axles/running gear – reduced tyre wear and fuel consumption
- Air suspension
#Braking system
- 2-line air brake system
- Colour-coded line routing for easy servicing
- Spring brake parking brake
- 2 non-interchangeable coupling heads at front
- EBS, electronic braking system with EBS socket at front
- with raise & lower valve
- Vehicle stability system
- Axle load detection via EBS CAN bus signal, for display in the driver's cab
Bsdo Ad N Dbjpfx Ac Ejdi
- AAC Basic, automatic load relief on the last axle as manoeuvring aid, up to 20 km/h, can be switched off manually
#Wheels and tyres
- 435/50 R19.5" make at manufacturer's discretion
- Steel rims, factory silver
#Electrics
- 24 volt, multi-chamber lamps, yellow LED side lighting
- Yellow LED side lighting coupled with indicators
- 2 white front position lamps
- 2 white/red rear outline marker lights
- Red/yellow non-interchangeable coupling heads
#Floor
- Screen-printed plywood approx. 30 mm thick, on longitudinal bearers for high point loading, forklift axle load max. 7100 kg
#Front wall / front corner posts
- 2 580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall,
- "Crash-Blocker", lower inside at approx. 140 mm height with steel impact protection
#Centre stanchions
- 3 pairs of sliding stanchions, movable along the full length, with 4-fold insertion pockets and long pocket at the bottom
- 3 pairs of stanchion positions
#Insert boards
- Wooden insert boards
#Rear wall / rear corner posts
- Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet
- Rear portal doors, 2-leaf, each with 2 internal turn-rod locks
#Curtain
- Curtain with welded-in horizontal and vertical straps
- Stainless steel tensioning buckles
#Roof
- Fliegl-Blitz-Verdeck
- Sliding roof, rear end section can be folded up, roof slides from rear to front, L-shaped roof rail for automotive industry, internal width between roof rails approx. 2 490 mm, curtain colour: white, lifetime "breakage guarantee", Roof non-elastic, minimal roof rail deflection during loading and unloading
#Approval
- with DEKRA inspection and expert report (acc. to §13 EG-FGV)
- Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL, acc. to DL 9.5 and load securing acc. to VDI 2700 sheet 12 ff.
- Warning sign for longer vehicle
- Expert report for longer vehicle combination