বৈদ্যুতিক ইনজেকশন ছাঁচনির্মাণ মেশিনFERROMATIK
ELEKTRA 180
বৈদ্যুতিক ইনজেকশন ছাঁচনির্মাণ মেশিন
FERROMATIK
ELEKTRA 180
উৎপাদন বছর
২০০৭
অবস্থা
ব্যবহৃত
অবস্থান
ইতালি 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- বৈদ্যুতিক ইনজেকশন ছাঁচনির্মাণ মেশিন
- উৎপাদক:
- FERROMATIK
- মডেল:
- ELEKTRA 180
- উৎপাদন বছর:
- ২০০৭
- অবস্থা:
- ব্যবহারের জন্য প্রস্তুত (ব্যবহৃত)
মূল্য এবং অবস্থান
- অবস্থান:
- Italy
কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A20244255
- রেফারেন্স নম্বর:
- IT-INJ-FER-2007-00001-007
- আপডেট:
- সর্বশেষ ০৯.১০.২০২৫
বিবরণ
General Data
Measurements width 1850
Measurements depth 5800 mm
Measurements height 2200 mm
Machine weight 9400 kg
Injection Unit
Screw diameter 45 / 48 / 50 mm
Shot weight 229 / 289 / 357 g
Stroke volume 286 / 318 / 393 cm³
Injection pressure 2494 / 1970 / 1878 bar
Screw speed 270 rpm
Clamping Unit
Clamping force 1800 kN
Opening stroke 540 mm
Ijdpfx Aoxl H E Ueb Hotn
Max open daylight 1230 mm
Mould height min 300 mm
Mould height max 790 mm
Ejector stroke 200 mm
Ejector force for / back 49 kN
This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.
Application Types
Injection Moulding
Measurements width 1850
Measurements depth 5800 mm
Measurements height 2200 mm
Machine weight 9400 kg
Injection Unit
Screw diameter 45 / 48 / 50 mm
Shot weight 229 / 289 / 357 g
Stroke volume 286 / 318 / 393 cm³
Injection pressure 2494 / 1970 / 1878 bar
Screw speed 270 rpm
Clamping Unit
Clamping force 1800 kN
Opening stroke 540 mm
Ijdpfx Aoxl H E Ueb Hotn
Max open daylight 1230 mm
Mould height min 300 mm
Mould height max 790 mm
Ejector stroke 200 mm
Ejector force for / back 49 kN
This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.
Application Types
Injection Moulding
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2017
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 631 7... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে