ফাইনব্ল্যাঙ্কিং প্রেস
Feintool GKP-F100

উৎপাদন বছর
১৯৮৬
অবস্থা
ব্যবহৃত (সীমিত কার্যক্ষমতা)
অবস্থান
Nordrhein-Westfalen জার্মানি
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
ফাইনব্ল্যাঙ্কিং প্রেস Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100
Feintool GKP-F100

মেশিন সংক্রান্ত তথ্য

মেশিনের নাম:
ফাইনব্ল্যাঙ্কিং প্রেস
উৎপাদক:
Feintool
মডেল:
GKP-F100
মেশিন নম্বর:
97862034
উৎপাদন বছর:
১৯৮৬
অবস্থা:
ব্যবহারের জন্য প্রস্তুত (ব্যবহৃত)
কার্যকারিতা:
সীমিত কার্যক্ষমতা

প্রযুক্তিগত বিবরণ

চাপের শক্তি:
১০০ t
স্ট্রোক দৈর্ঘ্য:
৫০ মিমি
কর্মরত প্রস্থ:
১৮০ মিমি
ইনস্টলেশন উচ্চতা:
২৫৫ মিমি
শীটের বেধ (সর্বাধিক):
৫ মিমি

প্রদান

অবস্থান:
Nordrhein-Westfalen, জার্মানি জার্মানি – দূরত্ব: আনুমানিক ৭,৫৩৬ কিমি
উপলভ্যতা:
নিলাম শেষ হওয়ার সাথে সাথেই
সরবরাহের শর্তাবলী:
EXW
বিতরণ ও লোডিং খরচ:
সাইটে সংগ্রহ করুন:
বিনামূল্যে
শিপিং খরচ:

বিবরণ

TECHNICAL DETAILS

Pressing force: 100 t
Total force: 1,000 kN
Ring serration force: 40 - 310 kN
Counterholder force: 10 - 270 kN

Max. material width: 180 mm
Max. material thickness: 5 mm

Min. stroke rate: 20 rpm
Max. stroke rate: 80 rpm
Stroke: 50 mm

Feeding device
Max. strip thickness: 5 mm
Max. strip width: 180 mm
Max. feed length per ram stroke: 999.9 mm
Tensile force per feed (starting force): 6 kN
Clamping force: max. 19 kN
Max. feed height adjustment: + 40 mm
Max. distance between feed rollers: 20 mm
Resolution, related to rollers: 0.1 mm


MACHINE DETAILS

Input voltage:
400 V
Input frequency: 50 Hz
Connected load: 13.5 kW
Pump power: 3 kW
Motor power: 3 kW

Air connection: 6 bar

Height adjustment type: hydraulic

Dimensions & Weight
Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm
Installation height: 255 mm
Weight: approx. 6 t

Year of last overhaul: 1997


EQUIPMENT
Decoiler
Two tool sets

Note: Further technical data on the machine can be found in the attached manual. 

The seller has repeatedly had issues with the processing and blow-out cycle. As a result, parts were not blown out and the machine stopped for safety reasons. However, the seller assumes that this is merely a matter of adjustment. The seller recommends an overhaul of the contro



বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।

নথিপত্র

পেমেন্ট প্রসেসিং

ক্রয় সংক্রান্ত অতিরিক্ত খরচ:
১৮ %
পরিশোধের শর্তাবলী:
১০০% অগ্রিম প্রদান
পরিশোধের পদ্ধতি:
Vorkasse Überweisung Iconব্যাংক স্থানান্তর
Mastercard LogoVisa LogoCartebleue LogoKlarna LogoiDEAL | Wero Logo
চূড়ান্ত বিডের পরিমাণে চালান ইস্যু হবে, সঙ্গে সম্ভাব্য অপসারণ/লোডিং খরচ, পরিবহন খরচ, ক্রয় সংক্রান্ত অতিরিক্ত খরচ ও আইনত প্রযোজ্য ভ্যাট যোগ হবে।

প্রস্তাবের বিবরণ

বিজ্ঞাপন আইডি:
A21465212
রেফারেন্স নম্বর:
AUC-2603143
আপডেট:
সর্বশেষ ১৭.০৩.২০২৬
এক্সক্লুসিভ অফার:
শুধুমাত্র নিলামে উপলব্ধ

যোগাযোগ

Cedric Schuhmann
যোগাযোগ ব্যক্তি: Cedric Schuhmann
মেশিন আইডি: 21465212
টেলিফোন: +49 201 857 861 77
SiegelSiegel

Machineseeker ক্রেতা সুরক্ষা

নিরাপদ পেমেন্ট এস্ক্রো অ্যাকাউন্টের মাধ্যমে
কড়া যাচাইকৃত বিক্রেতা
ব্যক্তিগত এবং বহুভাষিক সহায়তা
ক্রয়মূল্য শুধুমাত্র মাল হস্তান্তরের পরে প্রদান করা হবে।

পরিদর্শন

পরিদর্শন সম্ভব
মেশিনে বিদ্যুৎ সংযোগ আছে
Machineseeker সাধারণত ব্যবহৃত যন্ত্রপাতি পরিদর্শনের সুপারিশ করে।
সকল তথ্য সর্বোত্তম জ্ঞান ও সদিচ্ছার ভিত্তিতে দেওয়া হয়েছে – অনুগ্রহ করে সরাসরি যাচাই করুন।

যোগানদাতা

Trustseal
পেশাদার বাণিজ্যিক বিক্রেতা
Nordrhein-Westfalen জার্মানি জার্মানি
দূরত্ব: আনুমানিক ৭,৫৩৭ কিমি

এখানে আপনার যন্ত্র দাঁড়াতে পারে

নম্বর 1 সহ নিলাম

আপনি মাত্র কয়েক সপ্তাহের মধ্যে বিক্রি করবেন!
আপনি সর্বোচ্চ মূল্যে বিক্রি করছেন!
আপনি কোনো স্থায়ী খরচ ও ঝুঁকি ছাড়াই বিক্রি করেন!
অথবা কল করুন +49 201 857 861 10
সহযোগিতা নিয়ে আলোচনা করা

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

  1. Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
  2. All prices and bids are net prices and do not include VAT.
  3. Stated dismantling and loading costs are binding.
  4. All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
  5. Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
  6. The duration of an auction may be subject to change.
  7. By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
  8. Submitted direct or maximum bids are binding.
  9. Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
  10. The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
  11. In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ১৮ % net on the buyer’s net bid (unless stated differently in the listing).
  12. The General Auction Terms of Machineseeker Group GmbH apply.