শীট মেটাল ডিবারিং মেশিনERNST / Lissmac
ATLAS EBR
শীট মেটাল ডিবারিং মেশিন
ERNST / Lissmac
ATLAS EBR
উৎপাদন বছর
২০১৩
অবস্থা
ব্যবহৃত
অবস্থান
Hilchenbach 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- শীট মেটাল ডিবারিং মেশিন
- উৎপাদক:
- ERNST / Lissmac
- মডেল:
- ATLAS EBR
- মেশিন নম্বর:
- 630124
- উৎপাদন বছর:
- ২০১৩
- অবস্থা:
- ভাল (ব্যবহৃত)
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
- চলমান ঘণ্টা:
- ২,৩০০ h
মূল্য এবং অবস্থান
- অবস্থান:
- Dorfstraße 11, 57271 Hilchenbach, DE

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A20464360
- আপডেট:
- সর্বশেষ ০৬.১১.২০২৫
বিবরণ
DEBURRING MACHINE
MANUFACTURER: ERNST / LISSMAC
MODEL: ATLAS EBR
YEAR OF MANUFACTURE: 2013
Condition: Used
Operating hours: 2,300 hours
Working width: 1,500 mm
Maximum clearance: 1,520 mm
Workpiece thickness: 1–100 mm
Feed rate: 0.5 – 4.0 m/min, stepless adjustment
Transport belt: Rubber
Working height: 1,000 mm
Max. part weight: 160 kg/m²
Deburring roller diameter: 420 mm
50 oscillating strokes per minute
Drive motor: 15 kW
Abrasive size: 1,540 mm x 1,540 mm
ATLAS Brush Module-SPIN
2 rotating brush units: 300 mm x 260 mm
Vacuum unit for small parts 200 mm wide, 80 x 80 mm
Feed table (LxWxH x working width x sheet thickness):
2,704 x 385 x 1,650 x 0.8 – 100 mm
Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8 – 100 mm
Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8 – 100 mm
Cedpfx Agoxuu Dkegshd
Outfeed belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8 – 100 mm
Deburring module:
Power Current Air pressure Extraction m³/h Weight
16 32 6/80 bar 2,500/25 400 kg
Brushing module:
12 24 6/80 2,500/725 1,600 kg
Rotor module:
20 40 6/10 4,500/25 1,800 kg
Outfeed module:
1 2 - - 400 kg
Operating voltage: 400 V / 50 Hz
Special voltage: 480 V / 60 Hz
Control voltage: 24 V
Compressed air: 6 bar, dry and oil-free
Feed rate: 0.5 – 4 m/min stepless (optionally 1.0 – 8 m/min stepless)
Working height: 1,000 mm
The external filter is not included. Processing width: 1,500 mm, max. thickness: 100 mm. The vacuum table runs the full machine width. The first unit is a grinding roller (sponge rubber roller covered with abrasive, pneumatically tensioned) which can optionally oscillate and levels the burr. The second module consists of two steel wire brush rollers that round off or knock down burrs. This is followed by a rotor module (rotating multi-brush head) for fine rounding.
EC Declaration of Conformity
Dry dust extractor is not included, but we can promptly offer you an appropriate system as an option.
Operating manual
The machine is sold without infeed roller conveyor!
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
MANUFACTURER: ERNST / LISSMAC
MODEL: ATLAS EBR
YEAR OF MANUFACTURE: 2013
Condition: Used
Operating hours: 2,300 hours
Working width: 1,500 mm
Maximum clearance: 1,520 mm
Workpiece thickness: 1–100 mm
Feed rate: 0.5 – 4.0 m/min, stepless adjustment
Transport belt: Rubber
Working height: 1,000 mm
Max. part weight: 160 kg/m²
Deburring roller diameter: 420 mm
50 oscillating strokes per minute
Drive motor: 15 kW
Abrasive size: 1,540 mm x 1,540 mm
ATLAS Brush Module-SPIN
2 rotating brush units: 300 mm x 260 mm
Vacuum unit for small parts 200 mm wide, 80 x 80 mm
Feed table (LxWxH x working width x sheet thickness):
2,704 x 385 x 1,650 x 0.8 – 100 mm
Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8 – 100 mm
Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8 – 100 mm
Cedpfx Agoxuu Dkegshd
Outfeed belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8 – 100 mm
Deburring module:
Power Current Air pressure Extraction m³/h Weight
16 32 6/80 bar 2,500/25 400 kg
Brushing module:
12 24 6/80 2,500/725 1,600 kg
Rotor module:
20 40 6/10 4,500/25 1,800 kg
Outfeed module:
1 2 - - 400 kg
Operating voltage: 400 V / 50 Hz
Special voltage: 480 V / 60 Hz
Control voltage: 24 V
Compressed air: 6 bar, dry and oil-free
Feed rate: 0.5 – 4 m/min stepless (optionally 1.0 – 8 m/min stepless)
Working height: 1,000 mm
The external filter is not included. Processing width: 1,500 mm, max. thickness: 100 mm. The vacuum table runs the full machine width. The first unit is a grinding roller (sponge rubber roller covered with abrasive, pneumatically tensioned) which can optionally oscillate and levels the burr. The second module consists of two steel wire brush rollers that round off or knock down burrs. This is followed by a rotor module (rotating multi-brush head) for fine rounding.
EC Declaration of Conformity
Dry dust extractor is not included, but we can promptly offer you an appropriate system as an option.
Operating manual
The machine is sold without infeed roller conveyor!
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2004
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 2754 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে

















