ইনজেকশন মোল্ডিং মেশিন

ENGEL victory 330H/80W/120 combi

The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment.

Key data (according to manufacturer's specifications ENGEL)
• Clamping force 1,200 kN (120 t), tie-barless clamping unit
• Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm
• Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm
• Ejector 130 mm stroke, 39.8 kN
• Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar
• Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw]
• Hydraulics: pump drive 30 kW, oil capacity 300 l
Lsdpfx Ajz Eimfjdpjrt
• Connection 3 × 400 V, 50 Hz, 139 kW / 220 A
• Control system ENGEL CC 200 [CHECK 09/25]
• Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner)

Your advantages
• Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines.
• Short setup times: Tools are installed from the side without tie-bar removal.
• Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles.
• Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer).
• Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores.
• Combi version with space for a rotary table or indexing plate (according to the manufacturer).
• Main injection unit with a newer plasticizing cylinder (2021).
• Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test]

Typical applications
2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts.

Scope of supply
• Injection molding machine as described [CHECK 09/25: with both injection units]
• ENGEL data sheet, layout plan, platen drawing
Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools.

Terms and conditions
• Price on request
• Available presumably from week 48/2026
• Payment 100% advance payment
• Transport throughout Europe on request

Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।