উল্লম্ব একক টাকু বাঁক কেন্দ্র

EMAG VL 400 (Siemens)

Vertical Single-Spindle Turning Center / Vertical Lathe
Manufacturer: EMAG
Model: VL 400 (Siemens)
Year of manufacture: 2021
Operating hours: approx. 1,848

Turret base unit and Y-axis slide unit

HP turret drive unit for driven tools (C442)
with internal coolant supply to the tool
Max. speed: 6,000 rpm
Nominal speed: 3,200 rpm
Tool carrier unit for driven tools: 12 x BMT75

Tjdpfxovq Iwys Agljf
Rotary workpiece transport system, O-version
Drag frame system for 10 workpieces
Workpiece height (incl. workpiece pallet): max. 300 mm
Workpiece weight: max. 60 kg

Set (10 pieces) drag frames for O-band
for workpiece diameter: 150 - 400 mm

Blow-off device for workpiece and clamping device (Pick-Up)

Coolant supply: 15 bar
Coolant pump flow rate approx. 80 l/min at 15 bar.
Cooling unit (6.5 kW, water - air)
A cooling unit (with 2-circuit technology) regulates the thermal balance of the machine.
Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C).

Coolant double filter, manually switchable
Filter fineness 100 μm, with electrical and mechanical contamination indicator

Chip conveyor
Hinged belt design: discharge to the rear
Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l)

Emulsion mist extraction: extraction capacity approx. 800 m³/h
Rinsing gun

Workpiece measurement with probe
ejecting air for probe
Tool life monitoring (sister tool management)

Tool breakage monitoring TOOLINSPECT MCU-EUROPA
(SIEMENS 840Dsl, FANUC 31i/32i)

3-color signal light

Axial drilling-milling head – BMT75 CC
5x angular drilling-milling head 90° - BMT75 CC (i=1:1)
Set of tools for OP10 + OP20

Hydraulic power chuck cylinder Gr.150 - with 1 media feedthrough
Max. tensile force 10,850 daN at 70 bar

Coolant through the spindle
Programmable clamping pressure regulation

3-jaw power chuck KNCS-N 500-155 quick change
max. = 2,200 rpm (reference speed according to DIN 6386)
Set of hard base jaws
Set of soft top jaws

Accessories for KNCS-N 500-155
Rinsing nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 finishing turning tool, external
1x 8.BMT25VL8IKX50 roughing turning tool, external
1x 60.7516VL8IKDI15 engraving tool
1x 60.7516VL8IKDI15 tapping chuck
1x 40.75V5KRVL8IKD face mill 50 mm
3x 80.75V5VL8IKD boring bar holders
2x 27.V520HYDL26 drill, diameter 20 mm
1x 42.V522L08Ik drill, diameter 22 mm
1x 27.V514WNL31 drill, diameter 14 mm

Software package
Operating manual / Maintenance handbook
251125ä

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।