স্টিল কনভেয়র বেল্ট, কৃষি পরিবাহকdie magnetprofis
Stahlförderband Haldenband Förderband
স্টিল কনভেয়র বেল্ট, কৃষি পরিবাহক
die magnetprofis
Stahlförderband Haldenband Förderband
উৎপাদন বছর
২০২৬
অবস্থা
নতুন
অবস্থান
Ursberg 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
মূল্য এবং অবস্থান
- অবস্থান:
- Oberrohrer Straße 8/10, 86513 Ursberg, Deutschland

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A21189990
- আপডেট:
- সর্বশেষ ০৮.০২.২০২৬
বিবরণ
DM Flat Conveyor Belt Type FB-700 without substructure
for bulk material conveying
Conveyor belt length: 6,000 mm
Belt width: 650 mm
Fabricated from structural steel, laser-cut, bent, and welded
Base frame powder-coated in RAL 5015
Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time.
Ffedpsyhznhjfx Abzsu
Carrier roller system on the return strand, shaft Ø60/15 mm
Roller station spacing approx. 500 mm (custom options possible)
Closer roller spacing in load area
Drive drum + tail drum made of S235 steel, welded and machined
Ø220x700 mm crowned, shaft fixed with pillow block bearings.
Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec
Connection 400 V, 50 Hz, protection class IP54
Drive supplied prewired to motor terminal box
(Commissioning must be performed by a qualified electrician)
Motor mounted on right side in direction of transport, pull configuration.
Bearing points equipped with robust UCF flange bearings incl. grease nipples.
Rubber conveyor belt DM EP250/2 3+1.5 cover
Chevron profile, 17 mm high x 650 mm wide
Joint section without profile, endlessly hot vulcanized
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
for bulk material conveying
Conveyor belt length: 6,000 mm
Belt width: 650 mm
Fabricated from structural steel, laser-cut, bent, and welded
Base frame powder-coated in RAL 5015
Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time.
Ffedpsyhznhjfx Abzsu
Carrier roller system on the return strand, shaft Ø60/15 mm
Roller station spacing approx. 500 mm (custom options possible)
Closer roller spacing in load area
Drive drum + tail drum made of S235 steel, welded and machined
Ø220x700 mm crowned, shaft fixed with pillow block bearings.
Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec
Connection 400 V, 50 Hz, protection class IP54
Drive supplied prewired to motor terminal box
(Commissioning must be performed by a qualified electrician)
Motor mounted on right side in direction of transport, pull configuration.
Bearing points equipped with robust UCF flange bearings incl. grease nipples.
Rubber conveyor belt DM EP250/2 3+1.5 cover
Chevron profile, 17 mm high x 650 mm wide
Joint section without profile, endlessly hot vulcanized
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2016
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 8236 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে








