CTS তাপমাত্রা শক টেস্ট চেম্বার TSS-70/130 গরম: +৫০°C থেকে +২০০°C ঠান্ডা: -৮০°C থেকে +১০০°C ১৩০ লিটার

CTS TSS-70/130

CTS

Type: TSS-70/130
Ibodjy Hkd Hepfx Anwoc
Water-cooled cooling unit

For sale is a high-quality temperature shock test chamber from CTS
(Clima Temperatur Systeme), model TSS-70/130.
The device is used for performing temperature shock tests
and is typically used in industry, research, and quality assurance.

Application areas:
Material tests
Aging tests
Electronics and component tests
Temperature shock and cyclic temperature tests

Technical data:
Type: TSS-70/130
Test volume: 130 liters

Temperature range:
Hot chamber: +50°C to +200°C
Cold chamber: -80°C to +100°C
Heating rate: approx. 6 K/min from room temperature to +180°C
Cooling rate: approx. 4 K/min from room temperature to -60°C

Temperature deviation:
±1 K in time
±2 K spatially

Temperature change rate:
max. 100 K/min on average for shock test tests
without heat input

Temperature adjustment rate:
≤ 15 min in the range of -65°C to +200°C
with 10 kg of ICs

Cycle time:
< 10 seconds

Electrical data:
Connection: 400 V, 3/N, 50 Hz
Rated power: approx. 17.2 kW
Rated current: approx. 29 A
On-site protection: 32 A slow-blow fuse
Connection: Cekon 32

Refrigeration system:
Refrigerant: R404A / R23
water-cooled, low-noise, fully hermetic

Equipment / Features:
CTS control panel
Microprocessor-controlled control and monitoring system
Program operation
up to 100 test programs possible
digital setpoint and actual value display
RS232 interface
2 free switching channels for on-site control of the test specimen
Fault message on potential-free contact
Load up to 30 V DC, 2 A
EMC tested

Technical design:
Hot and cold chamber
Mobile frame with lifting spindle drive
Test chamber / mobile frame made of stainless steel, material no. 1.4301
Insert basket made of stainless steel wire
Pipe passage NW 50 with sealing plug
Compressed air connection 1/4" AG
Condensate drain non-pressurized R 1/2" internal thread
Safety door lock
lockable door with window

Dimensions according to installation diagram:
External dimensions approx.: 2335 x 940 x 1820 mm
Loading dimension approx.: 1990 x 940 x 1652 mm
Test chamber dimensions: height approx. 410 mm
Width approx. 480 mm, depth approx. 660 mm
Window: 300 x 300 mm

Other data:
Protection class: IP 22
Sound pressure level: < 60 dB(A)
Weight: approx. 950 kg
Average consumption during test cycle: approx. 8 kWh

For your safety as a buyer, the following information:
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, refill with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.

Condition: used

Scope of delivery: see pictures

(Changes and errors in technical data are subject to change!)

We will gladly answer any further questions you may have by telephone.

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।