আধা স্বয়ংক্রিয় ধাতু কর্তনকারী

CORMAK S-440R przecinarka taśmowa do metalu

Semi-automatic CORMAK S440R band saw. Its arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm.

Fgjdpsi Dx R Nofx Aaysd
Machine features

Semi-automatic band saws, after being switched, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Machine's arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm.


Technical data

Minimum cutting diameter Ø 5 mm

Minimum material length in vice 30 mm

Vice base from ground distance 780 mm

Cutting band dimensions 5200×34×1.1 mm

Total power 4.4 kW

Band speed 20/90 m/min

Dimensions (L×W×H) 2500×1900×1450 mm

Weight 1100 kg


Max. cutting range [mm]
Angle
0º ø450 620×440 610×440 450×450
45º R ø440 500×190 360×440 420×420
45º L ø440 510×180 460×390 390×390
60º R ø330 330×170 170×440 300×300
60º L ø350 350×170 330×310 310×310


Standard equipment

PLC controller
Semi-automatic operating cycle
Control console on a separate component
Control panel with an LCD display
Built-in hydraulic unit
Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control
Arm position memory function (arm returns to a defined height after cutting)
Hydraulically controlled vice's jaws (long stroke cylinder with position memory)
Cutting at angles of L/R 60o – 45o – 0o – 45o – 60o
Digitally displayed set cutting angle
Smooth band speed adjustability (inverter)
Powered brush for cleaning the band
Cooling system
Bi-metal saw blade
EC Declaration of Conformity
User manual
For more information please visit our web page or contact us.