শিল্প নিষ্কাশন

CORMAK DCV8900TC

New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation!

The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage.

They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc.

Advantages of DCV dust extractors

Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor
the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air
Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period
Strong and quiet radial fan guaranteeing you high negative pressure efficiency
Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors
Failure-free filter shaking system with the possibility of working in an automatic cycle
Mobile chassis facilitating trouble-free movement of extractors throughout the plant
Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system
Control cabinet for switching the device on/off
The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used
It is forbidden to use this extractor in an explosive atmosphere
The extractor is not adapted to work with wet raw materials (e.g. wet sawdust)
Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers
Reduction - Warm air return additionally payable

Technical parameters

CONTINUOUS ENGINE POWER S1

7.5 kW / 400 V, 50 Hz

SPEED

3000 rpm

SUCTION CAPACITY

8900 m3/h

SUCTION PIPE DIAMETER

300 mm

SUCTION SPEED

28-32 m/s

FILTER SURFACE AREA

20 m2
Iodpfx Abjudaazeqoaw

FILTER MATERIAL
Polyester, 5 microns

NUMBER OF FILTERS
45

DIMENSIONS
1170x2400x2240 mm WEIGHT 500 kg