পাঞ্চ প্রেসBRUDERER
BSTA 180
পাঞ্চ প্রেস
BRUDERER
BSTA 180
VB ট্যাক্স (মূসক) অতিরিক্ত
১২,৯৯৯€
উৎপাদন বছর
২০০১
অবস্থা
ব্যবহৃত
(সম্পূর্ণ ক্রিয়াশীল)
অবস্থান
Mühldorf am Inn 

মৌলিক তথ্য
- মেশিনের নাম:
- পাঞ্চ প্রেস
- উৎপাদক:
- BRUDERER
- মডেল:
- BSTA 180
- মেশিন নম্বর:
- 11572
- উৎপাদন বছর:
- ২০০১
- অবস্থা:
- ব্যবহৃত
- কার্যকারিতা:
- সম্পূর্ণ ক্রিয়াশীল
- চলমান ঘণ্টা:
- ৪৭,২৬২ h
মূল্য এবং অবস্থান
VB ট্যাক্স (মূসক) অতিরিক্ত
১২,৯৯৯€
- অবস্থান:
- Mühldorf am Inn, জার্মানি

কল করুন
প্রযুক্তিগত বিবরণ
মাত্রা এবং ওজন
মোট ওজন:
১,৯৫০ কেজি
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A22865645
- আপডেট:
- সর্বশেষ ১৭.১১.২০২৬
বিবরণ
The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed.
The machine is partially functional:
The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production.
The rubber mounts for the slides are brittle and are breaking off.
The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025.
Nominal force: 180 kN (18T)
Stroke rate: 100-1300 strokes per minute (variable)
Strip feed: Bruderer BZA 60
Iodpoz H H Dqofx Agdsii
Adjustable stroke: 8-40 mm
Main drive: 16 kVA
Power supply: 400V / 50Hz
Table area: 300x400 mm
Strip feed height (adjustable): 50-100 mm
Max. strip width: 60 mm
Max. material thickness: 2 mm
Machine dimensions: approx. 1300x1000x2300 mm
Weight: 1950 kg
Operating hours: approx. 47262
The machine will be dismantled in week 46.
Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
The machine is partially functional:
The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production.
The rubber mounts for the slides are brittle and are breaking off.
The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025.
Nominal force: 180 kN (18T)
Stroke rate: 100-1300 strokes per minute (variable)
Strip feed: Bruderer BZA 60
Iodpoz H H Dqofx Agdsii
Adjustable stroke: 8-40 mm
Main drive: 16 kVA
Power supply: 400V / 50Hz
Table area: 300x400 mm
Strip feed height (adjustable): 50-100 mm
Max. strip width: 60 mm
Max. material thickness: 2 mm
Machine dimensions: approx. 1300x1000x2300 mm
Weight: 1950 kg
Operating hours: approx. 47262
The machine will be dismantled in week 46.
Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
বিঃদ্রঃ বিনামূল্যে নিবন্ধন করুন বা লগইন করুন, সমস্ত তথ্য পেতে।
থেকে নিবন্ধিত: 2023
১ অনলাইন বিজ্ঞাপন
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 8631 ... বিজ্ঞাপন
এই বিজ্ঞাপনগুলি আপনারও আগ্রহের হতে পারে।
সফল
আপনার বার্তাটি পাঠানো হয়েছে।
ক্ষুদ্র বিজ্ঞাপন
Plettenberg
৭,৪৭৪ km
পাঞ্চিং মেশিন ডবল কলাম
BRUDERERBSTA 20
BRUDERERBSTA 20
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে













