প্লাস্টিকের জন্য হিটিং এলিমেন্ট ওয়েল্ডিং মেশিন

BRANSON Emerson HP60/40 Heizelementschweißen

Heating Element Welding Machine HP60/40 by BRANSON

The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump.

Only a few operating hours (approx. 6,800 hours).

Usable heating element area: width 600 mm x depth 400 mm

Max. workpiece dimensions:
- Max. width: 620 mm
- Max. depth: 420 mm
- Max. upper height: 350 mm
- Max. lower height: 350 mm
(Combinations of part heights possible, depending on contour)
- Max. processing temperature for contact method: 400°C

The modular frame design allows for easy conversion and retrofitting.
The side doors and the front door in the welding area can be easily opened (for rapid retooling).
The automatic safety lift door ensures a high level of operator safety.
The temperature control units on the operator panel have actual/target displays.
The control device is a Siemens PLC HMI.
The machine is controlled by a Siemens PLC (S7-300 controller).
Bedpfx Aceykvdle Eodi
Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating.
The pin systems in the tool mounting surfaces ensure reproducible positioning.

Advantages of heating element welding technology:
- Reliable welding of workpieces with low or varying wall thicknesses.
- Low scrap rate due to dimensionally accurate and repeatable welds.
- Precise time, temperature, and force control enable welding of sensitive parts.
- Virtually all thermoplastics can be welded with this process.
- Different thermoplastic types can be joined (compatibility needs to be verified).

Technical data of the machine:
- Power supply: 3 x 400 V AC + N + PE
- Power: 25 kVA
- Rated current: 20 A
- Required cable cross-section: 5 cables, each 6 mm²
- Required pneumatic connection: 6 bar

Machine dimensions:
- Machine width: approx. 1.22 m
- Machine width with operator panel: approx. 1.8 m
- Machine depth: approx. 2.1 m
- Machine depth with operator panel: approx. 2.6 m
- Machine height: approx. 2.4 m
- Machine height with raised safety door: approx. 2.85 m (open door)

Machine weight: approx. 2.2 t

বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।