CNC অ্যাবকান্ট প্রেস, ডাই বাঁকানো মেশিন, বেন্ডিং প্রেস, শিট বেন্ডিং মেশিন, অ্যাবকান্ট ব্যাংক, ডাই বেBEYELER - BYSTRONIC
PR 8 (2500 kN x 3100 mm)
CNC অ্যাবকান্ট প্রেস, ডাই বাঁকানো মেশিন, বেন্ডিং প্রেস, শিট বেন্ডিং মেশিন, অ্যাবকান্ট ব্যাংক, ডাই বে
BEYELER - BYSTRONIC
PR 8 (2500 kN x 3100 mm)
স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৩২,০০০€
অবস্থা
ব্যবহৃত
অবস্থান
Hessisch Lichtenau 

ছবিগুলি দেখায়
মানচিত্র দেখান
মেশিন সংক্রান্ত তথ্য
- মেশিনের নাম:
- CNC অ্যাবকান্ট প্রেস, ডাই বাঁকানো মেশিন, বেন্ডিং প্রেস, শিট বেন্ডিং মেশিন, অ্যাবকান্ট ব্যাংক, ডাই বে
- উৎপাদক:
- BEYELER - BYSTRONIC
- অবস্থা:
- ব্যবহৃত
মূল্য এবং অবস্থান
স্থায়ী মূল্য ট্যাক্স (মূসক) অতিরিক্ত
৩২,০০০€
- অবস্থান:
- 37235 Hessisch Lichtenau

কল করুন
প্রস্তাবের বিবরণ
- বিজ্ঞাপন আইডি:
- A20998157
- রেফারেন্স নম্বর:
- 62169
- আপডেট:
- সর্বশেষ ২০.০১.২০২৬
বিবরণ
CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm)
Serial No. Year of manufacture: 2001
Press capacity: 250 tons
Working length: 3100 mm
Stroke: 365 mm
Frame gap: 410 mm
Clearance between side frames: 2750 mm
Table width: 100 mm, 200 mm with table extension
Table height above floor: 840 mm
Backgauge X-axis travel: 620 mm
Backgauge R-axis travel: 240 mm
Itodeya Iaqspfx Aa Uob
Approach speed: 200 mm/s
Working speed: 1-10 mm/s
Y-axis rapid traverse: 200 mm/s
Y-axis working speed: 1-10 mm/s
Y-axis return speed: 135 mm/s
Oil capacity: approx. 400 liters
Motor power: 18.5 kW
Connected load: approx. 25 kW
Power supply: 400 Volt, 50 Hz, 50 Amp.
- 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2
- 2 freely programmable stop fingers, movable laterally (Z1+Z2)
- Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm
- Press beam with servo valves and measuring system Y1 and Y2
- FIESSLER AKAS safety light barrier
- Operation via electrical foot switch and/or two-hand control panel
- Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot
- Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot
- TRUMPF tool system, without tooling
Dimensions L x W x H: 0 x 2500 x 3400 mm
Machine height: 3350 mm (max. height 3400 mm)
Weight: 17,000 kg
In good condition
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
Serial No. Year of manufacture: 2001
Press capacity: 250 tons
Working length: 3100 mm
Stroke: 365 mm
Frame gap: 410 mm
Clearance between side frames: 2750 mm
Table width: 100 mm, 200 mm with table extension
Table height above floor: 840 mm
Backgauge X-axis travel: 620 mm
Backgauge R-axis travel: 240 mm
Itodeya Iaqspfx Aa Uob
Approach speed: 200 mm/s
Working speed: 1-10 mm/s
Y-axis rapid traverse: 200 mm/s
Y-axis working speed: 1-10 mm/s
Y-axis return speed: 135 mm/s
Oil capacity: approx. 400 liters
Motor power: 18.5 kW
Connected load: approx. 25 kW
Power supply: 400 Volt, 50 Hz, 50 Amp.
- 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2
- 2 freely programmable stop fingers, movable laterally (Z1+Z2)
- Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm
- Press beam with servo valves and measuring system Y1 and Y2
- FIESSLER AKAS safety light barrier
- Operation via electrical foot switch and/or two-hand control panel
- Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot
- Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot
- TRUMPF tool system, without tooling
Dimensions L x W x H: 0 x 2500 x 3400 mm
Machine height: 3350 mm (max. height 3400 mm)
Weight: 17,000 kg
In good condition
বিজ্ঞাপনটি স্বয়ংক্রিয়ভাবে অনুবাদ করা হয়েছে। অনুবাদে ত্রুটি থাকতে পারে।
যোগানদাতা
অনুরোধ পাঠান
টেলিফোন & ফ্যাক্স
+49 5602 ... বিজ্ঞাপন
আপনার বিজ্ঞাপন সফলভাবে মুছে ফেলা হয়েছে
একটি ত্রুটি ঘটেছে





















