পেলেট উত্পাদন লাইন

ANDRTITZ 1600-170/3R

Pellet production line ANDRITZ PALADIN 2,5 t/h
Year - 2017 , Only Press 2012
Working hours - 6.600
Exellent condition !!
1. Hydraulick - Electro crane for feeding logs
2. Logs Debarker
3. Wood chepar - 65 x 115 cm - 315 Kw electro motor
4. Hydraulic floor - New (additional field)
2 x fields 8x2m.
5. Input Lateral Transporter (606x606)
Drive: hydraulic drive 5,5kW, 4hydrocilinders.
Serves for raw material feed and up to 50 ° (chop and sawdust) up to 30m in length. For the
towel element, Gal's transport chain is used, with hardwood slats attached to it, and the name of
the flywheel carrier. It consists of a zipper, angle, flat and drive module.
Drive: Hellicocentric 7.5 kW gearshift gear, class IE2.
6. Input silos
Hydraulic drive 5,5kW, 2 hydrocilinders.
7. Double screw feeder
Screw feeder ~4m with two screws. Used for feeding material into drying drum (through
rotational valve).
8. Industry furnace – 2,5 MW (new burners, new generation).
Zmaj 2,5MW is furnace designed specially for air heating in process industry. It uses exclusively
pellet as fuel. It consists of 6 separate burners with automatic pellet feed. By burning pellet,
furnace reaches preset temperature of air.
Thermal power: 1.2MW.
Volume of burner chamber: 3m3.
Number of burners: 6.
Power per burner: 200kW.
Control: separate for each burner.
Insulation: Tervol HTB 700
9. Hot air mixer
Capacity: 48.000 m3/h.
10. Rotary drum dryer 3t/h
Drive: 2 x 5,5kW.
Capacity: 3t/h.
11. Pipelines
12. Cyclone separator 2900
Cyclon separator 2900 is part of air transport system used for separation of transporter fluid (air)
from transported material (particles of sawdust). It is conected to SC fan – a drive element for air
transport system. It's placed directly over the rotational valve and hammer mills.
Delivered with support construction.
13. Rotational valve B (x6 small used, 2 new)
Power: 3kW.
Big sized rotor.
14. Hammermill 3t/h
Hammers: S=10mm, HARDOX.
Capacity: 3 t/h.
15. SC CB fan
It consists of a chassis, a chassis, and a drive. The fan's inlet is connected with a single 1800
cyclone and the outlet with the Ø900 pipe funnel. Serves air transport from hammer mills.
Capacity: 48.000m3/h.
Drive: 55kW.
16. SC fan
Capacity: 48.000m3/h.
Drive: 50kW.
17. Cyclone1700 (x6)
18. Support construction for cyclone battery
With maintenanace platform.
19. Screw feeder CB
20. PELLET PRESS ADNRITZ PALADIN 1600 ( 2 x 90 Kw )
Screw feeder beneath the cyclone battery ~5m.
21. Homogenizer – New. (new generation)
Device for biomass homogenization. Provides autonomy for rest of the process.
Drive: motor-reduktor 5kW.
22. Bucket elevator – Homogenizer
Tranporting device for sawdust.
INOX buckets, rubber belt.
Drive: 3kW.
23. Preconditioner
Konditioner without screw feeder. Directly influences quality of pellet and pellet press tool
endurance.
Rbedpfxoq Rfhdo Aanst
24. Automatic Packing unit - 6t/h